To successfully deploy and run the Power Electronics Add-On, a valid deployment license must be installed from the development machine. A deployment license can be tied to one or more NI targets, identified by the MAC address of their primary network adapters (NIC). The Power Electronics Add-On can only be executed on the targets added to the deployment license. Follow the steps below to request and install a deployment license.
Requesting a License
Submit a license request using the OPAL-RT Support Portal. Include the following information in the request:
Your OPAL-RT Project Number
The MAC Address of the primary Ethernet adapter of your Real Time target
A message specifying that the license will be for use with the OPAL-RT Power Electronics Add-On for NI VeriStand.
The MAC Address can be obtained by connecting to Real Time target in the NI Measurements & Automation Explorer (NI MAX). Be sure to use the address from the eth0 (Primary) section.
Installing a License
Open the OPAL-RT License Manager. This program is installed alongside the Power Electronics Add-On.
A window will pop up asking you to browse for a License File(s).
Select the License Files(s) you would like to install.
Click the OK button.
Repeat this process on all development machines that will be used to connect to the Real Time target.
