Block
Mask
Description
This block recovers the data from a analog out Interface block and generates the signals needed by the DataOut block.
Parameters
This block has no parameters.
Inputs
| ModelSync | This signal is the synchronization pulse train. It is usually connected to the ModelSync signal. |
|---|---|
| Theta, Theta1 | This signal represents the resolver calculated angle in per unit. It varies from 0 to 1 for angle positions from 0 to 2π with angle steps as accurate as 2.4e-5 radian. Its format is UFix18_18. |
| CarPu, CarPU1 | This signal represents the carrier obtained by Resolver In block after rescaling in per unit. This signal is useful to calibrate Resolver In block. Its format is Fix18_14. |
| SinPU, SinPU1 | This signal represents the sine signal obtained by Resolver In block after rescaling in per unit. This signal is useful to calibrate Resolver In block. Its format is Fix18_14. |
| CosPU, CosPU1 | This signal represents the cosine signal obtained by Resolver In block after rescaling in per unit. This signal is useful to calibrate Resolver In block. Its format is Fix18_14. |
| IntegSpeed, IntegSpeed1 | This signal represents the difference of position in one CPU step. It is used to estimate the angular speed on the CPU side. Its format is UFix32_4. |
Outputs
| DataOut | This signal contains the data of an analog subsection and a valid bit. It is meant interfacing the DataOut block. |
|---|---|
| Sync | This signal represents a pulse to indicate the update of the DataOut port. It is to be connected to the DataSynci input port of the DataOut block corresponding to the channel selected for the DataOut signal. |
Characteristics and Limitations
This block has no specific characteristics or limitations.