Documentation Home Page ◇ Communication Protocols Home Page
Pour la documentation en FRANÇAIS, utilisez l'outil de traduction de votre navigateur Chrome, Edge ou Safari. Voir un exemple.

EtherCAT Slave

Owned by Sylvain Ménard
Last updated: Feb 23, 2024
2 min read

Have a question or need help? 

Solution

Software Platform Compatibility

Product Selection Guide

To emulate EtherCAT slave devices on the real-time simulator, both a diver license (OP3111) and a CIFX PCIe add-on module (OP3113) are required.

Type

Description

Product Number

Simulator Compatibility

OP4510v2
OP4512
OP4610XG

OP5033XG

OP5600v2
OP5650

OP5700
OP5705XG
OP5707XG

Driver

Driver license for EtherCAT Slave protocol. One license per CIFX 50E-RE PCIe board is required.
A Hilscher CIFX 50E-RE PCIe board (Product Number OP3113, see below) is required for each slave driver.
This board is used to interface the EtherCAT network with the simulator.

OP3111

YES

YES

YES

YES

Add-on module

EtherCAT CIFX 50E-RE PCIe Communication Interface*.
One driver license per CIFX 50E-RE PCIe board is required (sold separately)

OP3113-OP4510

OP4510v2: YES
OP4512: YES
OP4610XG: NO

 

 

 

OP3113-OP5030

 

YES

 

 

OP3113-OP56xx-OP57xx

 

 

YES

YES

* Available PCIe slot required. Note that OP4510 and OP4512 simulators only have one PCIe slot.

OPAL-RT TECHNOLOGIES, Inc. | 1751, rue Richardson, bureau 1060 | Montréal, Québec Canada H3K 1G6 | opal-rt.com | +1 514-935-2323