Benchmarks | 600-Node 20 kV Distribution System

Model name	600-node 20 kV distribution system
Highlights	Only simulation tool capable of simulating large scale distribution feeders in real time below 70 us without decoupling High performance gain with decoupling: 2 cores at 20 us Not limited in types of electrical component that can be used, e.g. fully-switched models for power electronics
Model diagram
Single-phase nodes	615
Sources (3φ)	1
Transformers (3φ)	1
Loads (3φ)	122
RLC (3φ)	324
Breakers (3φ) and faults (4φ)	19 + 1 = 20
Hardware	OP5707XG Motherboard: X11DPL-i Processor: Intel(R) Xeon(R) Gold 5222 CPU @ 3.80GHz; 8 cores RAM: 32 GB
Software	Platform: HYPERSIM Compiler: GCC 8.3.0
Minimum license required	HXG Max (2 cores)
Results 1 core	Number of core(s): 1 Minimum time step: 65 us *
Results 2 core	Number of core(s): 2 (with stubline) Minimum time-step: 20 us * * Performance under transient conditions varying considerably depending on the study type, this benchmark measures the minimum achievable time-step without overruns in steady-state conditions. A rule of thumb is to consider 10 to 20 % buffer time for calculations under transient conditions.
Benchmark
Performance comparison between new (OP5707XG) and previous (OP5700) hardware generations

OP5707XG