Documentation Home Page HYPERSIM Home Page
Pour la documentation en FRANÇAIS, utilisez l'outil de traduction de votre navigateur Chrome, Edge ou Safari. Voir un exemple.

Algebraic Loop Break Point

This block is used to break a loop of blocks and indicate the sequence of calculation blocks in the loop to HYPERSIM.

Input: u
Output: y


yn = un-1

  • The block connected to the output must be calculated first
  • The block connected to the input must be calculated last
  • The first block receives the result from the last block, with one time-step delay, which is a natural delay that is not generated by the 1/z block.

OPAL-RT TECHNOLOGIES, Inc. | 1751, rue Richardson, bureau 1060 | Montréal, Québec Canada H3K 1G6 | | +1 514-935-2323