Documentation Home Page ◇ HYPERSIM Home Page
Pour la documentation en FRANÇAIS, utilisez l'outil de traduction de votre navigateur Chrome, Edge ou Safari. Voir un exemple.
PSSE | Importing a Network
This document shows the steps of importing a PSSE model into HYPERSIM.
Step 1 - Create a new HYPERSIM model
Select New from File tab, then create a HYPERSIM file.
Select the desired folder and choose the file name, then Save it.
Step 2 - Import the PSSE model
The PSSE import feature can be found in the Network Import tool from the HYPERSIM Ribbon Options under the Network section.
Select the *.raw file from PSSE option and Import it.
To import a PSSE model into HYPERSIM, it is necessary to provide the path to the *.raw file in the designated "File" text field. Alternatively, users can utilize the browse option located on the right-hand side of the field for file selection.
For importing the dynamic data, the *.dyr file must bear the identical name as the *.raw file. The system automatically selects any other files within the same directory that share the same name.
While it is possible to import a model using only a *.raw file, without an accompanying *.dyr file, it is not possible to import solely a *.dyr file.
The PSSE Network Import operation generates a set of reports, which are useful, among other things, for:
Identifying any ignored or unsupported components.
Assist OPAL-RT in the identification of the cause of potential conversion issues.
For more details on these reports see Network Import Reports.
Options
Replace machines by sources | If activated, this option replaces all machines with ideal voltage sources. |
Group machines with controls | This feature merges the machines and their controllers into a subcircuit. |
OPAL-RT TECHNOLOGIES, Inc. | 1751, rue Richardson, bureau 1060 | Montréal, Québec Canada H3K 1G6 | opal-rt.com | +1 514-935-2323
Follow OPAL-RT: LinkedIn | Facebook | YouTube | X/Twitter