SPS WORKFLOW Schematic editor WORKFLOWSCHEMATIC EDITOR WORKFLOW WITH SFUNCTION

Introduction

This firmware includes:

One eHS x128 Gen4 Solver
One Dual Permanent Magnet Synchronous Machines (PMSM-VDQ) model
One Quad Generic Machines (GM) model
One Analog Output Mapping and Rescaling (AOMR) module
One Analog Input Differential Rescaling (AIR) module
One Thermal Losses (TL) module
One Saturable Transformer (satXFO) module

LoadIn/DataIn/DataOut mapping

	LoadIn	DataIn	DataOut
1	Config eHS	Inputs eHS	eHS Averaged
2	Scenario / Rst eHS = Status	TSDO 1 - eHS 0 to 7	eHS DownSample
3		TSDO 2 - eHS 8 to 15	Digital In 1A - 0 to 7
4	PWM 1A - 0 to 7	TSDO 3 - eHS 16 to 23	Digital In 1A - 8 to 15
5	PWM 1A - 8 to 15	TSDO 4 - eHS 24 to 31	Digital In 1A - 16 to 23
6	PWM 1A - 16 to 23	TSDO 5 - eHS 32 to 39	Digital In 1A - 24 to 31
7	PWM 1A - 24 to 31	TSDO 6 - eHS 40 to 47	Digital In 1B - 0 to 7
8	PWM 1B - 0 to 7	TSDO 7 - eHS 48 to 55	Digital In 1B - 8 to 15
9	PWM 1B - 8 to 15	TSDO 8 - eHS 56 to 63	Digital In 1B - 16 to 23
10	PWM 1B - 16 to 23	TSDO 9 - eHS 64 to 71	Digital In 1B - 24 to 31
11	PWM 1B - 24 to 31	Digital Out 1A - SDO 0 to 7	Analog In 2A - 0 to 7
12	Config AOMR	Digital Out 1A - SDO 8 to 15	Analog In 2A - 8 to 15
13	eHS PWM 1 - eHS 0 to 7	Digital Out 1A - SDO 16 to 23	PMSM VDQ 1/2
14	eHS PWM 2 - eHS 8 to 15	Digital Out 1A - SDO 24 to 31	Encoder Input on RS422
15	eHS PWM 3 - eHS 16 to 23	Digital Out 1B - SDO 0 to 7	Quad Generic Machine
16	eHS PWM 4 - eHS 24 to 31	Digital Out 1B - SDO 8 to 15	Encoder Input on Digital In 1A
17	Config eHS AIR	Digital Out 1B - SDO 16 to 23	Thermal Losses
18	Config PMSM VDQ1/2	Digital Out 1B - SDO 24 to 31	RMS and Power calculation
19	Config Encoder Input on RS422	AOMR/ Analog Out 1B - 0 to 7
20	Config Quad Generic Machine	Analog Out 1B - 8 to 15
21	Config Encoder Input on Digital In 1A
22	Config Thermal Losses
23	Config Encoder Output on RS422	eHS PWM 1 - 0 to 7
24	SFP	eHS PWM 2 - 8 to 15
25	Lookup Table Config	eHS PWM 3 - 16 to 23
26	RMS and Power calculation	eHS PWM 4 - 24 to 31
27		eHS SWG
28		PMSM VDQ 1/2
29		Quad Generic Machine
30		Thermal Losses
31		Encoder Output on RS422
32		LEDs
33		TSDO 10 - eHS 72 to 79
34		TSDO 11 - eHS 80 to 87
35		TSDO 12 - eHS 88 to 95
36		TSDO 13 - eHS 96 to 103
37		TSDO 14 - eHS 104 to 111
38		TSDO 15 - eHS 112 to 119
39		TSDO 16 - eHS 120 to 127
40		TSDO 17 - eHS 128 to 135
41		TSDO 18 - eHS 136 to 143
42		SFP
43		Lookup Table Config

System Overview

eHS solver

SPS Workflow specific

Connectivity

SPS Workflow specific

Source Type	Source Index	Source Name	Details

Source Type	Source Index	Source Name	Details
Input	0	CPU Input
	1	eHS Analog In	Slot 2A - Ch00-15
	2	PMSM VDQ 1/2	PMSM1 Ia/PMSM1 Ib
	2	PMSM VDQ 1/2	PMSM2 Ia/PMSM2 Ib
	3	Sine Wave Generator
	4	Quad Generic Machine	IM1 Stator Ia/IM1 Stator Ib/IM1 Rotor Ia/IM1 Rotor Ib
			IM2 Stator Ia/IM2 Stator Ib/IM2 Rotor Ia/IM2 Rotor Ib
			IM3 Stator Ia/IM3 Stator Ib/IM3 Rotor Ia/IM3 Rotor Ib
			IM4 Stator Ia/IM4 Stator Ib/IM4 Rotor Ia/IM4 Rotor Ib
	5	Data stream from SFP #00
Gate	0	CPU Gating Signal
	1	PWM
	2	Digital Input	Slot 1A - Ch00-31

SPS Workflow specific

To contextualize the Input and Gate Configuration table with this firmware configuration, the eHS firmware config tab must be configured with the following custom input source enumeration:

{'CPU Model',0,64;'Sine Wave Generator',3,32;'PMSM',2,4;'GM',4,16}

And this custom gate sources enumeration:

{'CPU Model',0,72;'Digital Inputs',2,32;'PWM',1,32}

Communication port configuration for the Dual PMSM (VDQ) block

	Dual PMSM Motors VDQ
Machine Label	PMSM 1	PMSM 2
Data In Port Number	28
Load In Port Number	18
Data Out Port Number	9

Connectivity (Input)

The signals received could be used as external carrier for machine resolver module.

Analog In - Slot 2A - Ch00-01

Encoder Output

Encoder outputs are sent to

Digital Out - Slot 3B - RS422

Hardware Pin assignment

Communication port configuration for the Quad Generic Machine (GM) block

	Quad Generic Machine
Machine Label	IM 1	IM 2	IM 3	IM 4
Data In Port Number	29
Load In Port Number	20
Data Out Port Number	11

Connectivity (Input)

The signals received could be used as external carrier for machine resolver module.

Analog In - Slot 2A - Ch00-01

Encoder Output

Encoder outputs are sent to

Digital Out - Slot 2B

	Encoder 1	Encoder 2

	Encoder 1	Encoder 2
A	Ch00	Ch04
B	Ch01	Ch05
Z	Ch02	Ch06

Hardware Pin assignment

Communication port configuration for the Thermal Losses (TL) block

	Thermal Losses

	Thermal Losses
Data In Port Number	30
Load In Port Number	22
Data Out Port Number	13

V2.20 Kintex-7 410T - eHS x128 - PMSM - IM - IO Config1

Introduction

System Overview

eHS solver

SPS Workflow specific

Connectivity

SPS Workflow specific

SPS Workflow specific

Communication port configuration for the Dual PMSM (VDQ) block

Connectivity (Input)

The signals received could be used as external carrier for machine resolver module.

Encoder Output

Encoder outputs are sent to

Communication port configuration for the Quad Generic Machine (GM) block

Connectivity (Input)

The signals received could be used as external carrier for machine resolver module.

Encoder Output

Encoder outputs are sent to

Communication port configuration for the Thermal Losses (TL) block