Documentation Home Page ◇ eHS Toolbox Home Page
Pour la documentation en FRANÇAIS, utilisez l'outil de traduction de votre navigateur Chrome, Edge ou Safari. Voir un exemple.
Initialization Bus Data ID filter
Block
Table of Contents
Description
This block filters the output data stream based on a given Data ID allowing the Valid signal only when the Data ID set in the mask matches signal's Data ID.
Mask Parameters
Data ID: This parameter sets the Data ID value to be filtered.
Inputs
Init_data_in: The decoded data stream from the address filter's output signal should be connected to this port.
Outputs
Data: The filtered data is outputted through this port.
Characteristics and limitations
Direct Feedthrough | NO |
Discrete sample time | YES |
XHP support | N/A |
Work offline | YES |
If you require more information, please contact https://www.opal-rt.com/contact-technical-support/.