Page Content

Description

The OP8124 MSCC module converts four standard ±16 Vpk voltages into four high-voltage outputs up to 150 V RMS/1 mA RMS.

Features

• LED fault indicators.

• Current and thermal protection

• Front screw terminal connectors

• Easy installation (in chassis).

The OP8124 module requires external power of ±24 Vdc @ 250 mAdc and 12 Vdc @ 275 mAdc that is included with the OP8120 chassis.

Applications

• Excitation voltage (grid, electrical machine, etc.) emulation

• High-Voltage amplifier

Open

OP8124 Conditioning Module

OP8124 Interface

Open

OP8124 Interface

Status LED Table

Each channel has two LEDs, one red and one green. The following table explains what the channel status is, according to the LED conditions.

Green LED	Red LED	Status

Green LED	Red LED	Status
On	Off	Activated	Open
On	On	Fault

Power LED Description

Each module has 2 power LEDs:

• When the left LED is on, it indicates that the internal ±15 Vdc power is functioning properly.

• When the right LED is on, it indicates that the ±24 Vdc power is functioning properly.

Specifications

General Specifications

Analog Inputs

Analog Outputs