HIL2GO-310 - I/O Bitstream Name and I/O Configuration

The I/O bitstream delivered with the HIL2GO bundle was tested at the factory on the unit you received. The bitstream is described in the table below.

Bitstream name and I/O configuration

I/O Bitstream

I/O Configuration

OP5145_1-EX-0001-3_6_0_818-AIO_DIO_TSDIO_PWMIO_QElO-02-0B.pdi

eHSx16 (default) or with eHSx32, eHSx64, eHSx128, standard or high performance depending on the option chosen at purchasing.

64 digital inputs or digital outputs
16 analog outputs
16 analog inputs
2 quadrature encoder RS422 inputs/outputs

The default eHS license class for this bundle is eHSx16 Standard. But you may have bought a license for eHSx32 Standard, eHSx32 High performance, eHSx64 Standard, eHSx64 High performance, eHSx128 Standard or, eHSx128 High performance. To see what license you bought, please check your invoice. To see what license class is activated on your system, please check in RT-LAB:
1. Select your target in the Project Explorer
2. Select the License tab.
3. Find EHS_CORE_TOKEN and check what license class is enabled. In this example, it is eHSx128.
4. Find EHS_GENn. If it is EHS_GEN4, it is eHS Standard. If it is EHS_GEN5, it is eHS High Performance.

Please refer to the page eHS and Schematic Editor for its configuration.

The Get I/O Infos command will display information about the target I/O cards and bitstream configuration in the target console.