HIL2GO-410 - I/O Slot 2, Section D, P4 (CH00-07) - Analog Inputs (OP48H20)

Connected I/O module is OP48H20 Standard I/O type H Module

Before designing cables, OPAL-RT recommends using the guideline Simulator EMC cable recommendations.
Before connecting the cables, make sure that the voltages or other electrical specifications are compatible with OPAL-RT DB37 specifications of I/O module OP48H20.

Connector P4 - Slot 2 - Section D - Ain channels 00 to 07
D37F Pin	Assignment Pin	DB37F Pin	Assignment Pin
1	See AOUT page	20	GND
2		21	GND
3		22	GND
4		23	GND
5		24	GND
6		25	GND
7		26	GND
8		27	GND
9	+AIN00	28	GND
10	+AIN01	29	GND
11	+AIN02	30	GND
12	+AIN03	31	GND
13	+AIN04	32	GND
14	+AIN05	33	GND
15	+AIN06	34	GND
16	+AIN07	35	GND
17	12 V_PROT*	36	GND
18	100 nF to pin 37	37	See pin 18
19	GND

* 12 V protected supply available to user. 1 A maximum current.

Channel	Signal Name	Device	Name	Data Name	Index
0	AIN00	OP4810IO_2D.AIN_CH00_07	u1	Slot 2D – Analog in/Channels 0 - 7	0
1	AIN01	OP4810IO_2D.AIN_CH00_07	u2	Slot 2D – Analog in/Channels 0 - 7	1
2	AIN02	OP4810IO_2D.AIN_CH00_07	u3	Slot 2D – Analog in/Channels 0 - 7	2
3	AIN03	OP4810IO_2D.AIN_CH00_07	u4	Slot 2D – Analog in/Channels 0 - 7	3
4	AIN04	OP4810IO_2D.AIN_CH00_07	u5	Slot 2D – Analog in/Channels 0 - 7	4
5	AIN05	OP4810IO_2D.AIN_CH00_07	u6	Slot 2D – Analog in/Channels 0 - 7	5
6	AIN06	OP4810IO_2D.AIN_CH00_07	u7	Slot 2D – Analog in/Channels 0 - 7	6
7	AIN07	OP4810IO_2D.AIN_CH00_07	u8	Slot 2D – Analog in/Channels 0 - 7	7