HIL2GO-410 - I/O Bitstream Name and I/O Configuration

The I/O bitstream delivered with the HIL2GO bundle was tested at the factory on the unit you received. The bitstream is described in the table below.

Bitstream name and I/O configuration

I/O Bitstream

I/O Configuration

OP5145_1‑EX‑0001‑3_11_2_12‑eHSx64_Gen5_MachineDrive_IOConfig2‑1B‑05

eHSx16 (default) or with eHSx32, eHSx64, eHSx128, standard or high performance depending on the option chosen at purchasing.

48 analog outputs at 1 MSPS or 24 AO at 2 MSPS
16 analog inputs at 2 MSPS
32 digital inputs
32 digital outputs
2 Quadrature Encoder RS422 inputs/outputs

The default eHS license class for this bundle is eHSx16 Standard. But you may have bought a license for eHSx32 Standard, eHSx32 High Performance, eHSx64 Standard, eHSx64 High Performance, eHSx128 Standard or, eHSx128 High Performance. To see what license you bought, please check your invoice. To see what license class is activated on your system, please check in HYPERSIM:
1. In the HYPERSIM tab, click Targets in the Tools section of the ribbon. The Target manager opens.
2. Select your target
3. Expand the menu using the arrow on the left of the target icon
4. Click on License
5. Find the line named “This will enable Generation 5 of the eHS Solver”. If the value is false, you have a license for eHS Gen 4 (Standard). If the value is true, you have a license for eHS Gen 5 (High Performance).
6. Find the line named “EHS licenses class” to find your eHS class. It can be eHSx16 (default), eHSx32, eHSx64 or eHSx128 (as shown in the example illustrated below).

Bitstream configuration can be checked from HYPERSIM, via the Target Diagnostic command on the Target Manager.