Documentation Home Page ◇ RT-XSG Toolbox Home Page
Pour la documentation en FRANÇAIS, utilisez l'outil de traduction de votre navigateur Chrome, Edge ou Safari. Voir un exemple.
ResolverIn Unpacking
Block
Mask
Description
This block recovers the data from RT-LAB through the LoadIN block and generates the signals needed by an application block.
Parameters
This block has no parameters.
Inputs
| LoadIn | This signal must be connected to one of the Cfg_INi input ports of the LoadIn block. |
|---|---|
| LoadInSOF | This signal must be connected to one of the SofINi input ports of the LoadIn block. |
Outputs
| CarrierInInvAmp, CarrierInInvAmp1 | This parameter from the CPU Model is the INVERSE of the resolver carrier amplitude in Volts. It is used internally for per-unit scaling. Its format is UFix16_12. |
|---|---|
| CarrierInOffset, CarrierInOffset1 | This parameter from the CPU Model is the offset of the resolver carrier in Volts. Its format is UFix16_10. |
| SineInInvAmp, SineInInvAmp1 | This parameter from the CPU Model is the INVERSE of the resolver sine amplitude in Volts. It is used internally for per-unit scaling. Its format is UFix16_12. |
| SineInOffset, SineInOffset1 | This parameter from the CPU Model is the offset of the resolver sine in Volts. Its format is UFix16_10. |
| CosInInvAmp, CosInInvAmp1 | This parameter from the CPU Model is the INVERSE of the resolver cosine amplitude in Volts. It is used internally for per-unit scaling. Its format is UFix16_12. |
| CosInInvOffset, CosInInvOffset1 | This parameter from the CPU Model is the offset of the resolver cosine in Volts. Its format is UFix16_10. |
| wo*2*ksi, wo*2*ksi1 | This parameter from the CPU Model is the first parameter of the filter used to extract the position from the modulated signal. Its format is UFix24_4. |
| wo*2*dt, wo*2*dt1 | This parameter from the CPU Model is the second parameter of the filter used to extract the position from the modulated signal. Its format is UFix24_9. |
| InternalCarrierDelay, InternalCarrierDelay1 | This parameter from the CPU Model is the delay of acquisition of modulated signals. This delay is taken into account when the carrier is generated internally. Its format is UFix11_0. |
| DemodulationCarrierSel, DemodulationCarrierSel1 | This parameter from the CPU Model is used to select the carrier used for demodulation. A 0 means the carrier specified by Carrier_in is used for demodulation; unless the carrier is generated internally by the Resolver In block. Its format is UFix1_0. |
| CarrierFreqIntegrationFactor, CarrierFreqIntegrationFactor1 | This parameter from the CPU Model is the internal carrier frequency. Its format is UFix32_24. This input is a factor of the real value. The value at the input is the carrier frequency multiplied by 10x10^-9 (tsfpga) and 2^18 (integrator output maximum value). |
| CarrierOutAmp, CarrierOutAmp1 | This parameter from the CPU Model is the carrier amplitude in Volts. It is used to step up the carrier amplitude to the voltage level required by the resolver "exciter". Its format is UFix16_11. |
| CarrierOutOffset, CarrierOutOffset1 | This parameter from the CPU Model is the carrier offset in Volts. It is used to shift the carrier to the voltage level required by the resolver "exciter". Its format is UFix16_11. |
Characteristics and Limitations
This Block has no specific characteristics or limitations.
OPAL-RT TECHNOLOGIES, Inc. | 1751, rue Richardson, bureau 1060 | Montréal, Québec Canada H3K 1G6 | opal-rt.com | +1 514-935-2323