Most blocks in the Library Browser have parameters, adjustable through the Parameters Sidebar settings that appear when that block is selected. Below is an example of the parameters available when an IGBT with antiparallel diode is selected.

Users adjust the blocks of their parameters as their models are built, and as required. Parameter Sets, additionally, can help users test a range of values or a series of ranges. Parameters and parameter sets work closely with blocks, as they change the interaction of the model blocks in the diagram, and thus the observed outcome(s) of your simulation.

Some blocks, such as the Ground, have no parameters associated with them because they are not required for their functioning. Other blocks, such as Text blocks, have no parameters, but accept input as part of their use in the schematic.

Parameters can be displayed on the work area canvas near the block by selecting the switch within the Deep Panel of the selected parameter.

For more on these related topics, see: Changing Parameters of Components; Parameters Sidebar; Parameter Sets; & The Block Library

Browser not supported