OP1400PR PHIL Prime - OP8110 4Q Power Amplifier Certification and Standards

This product meets the essential requirements of applicable European Directives as follows:

The essential requirements of the directive 2014/30/EU are covered by the following harmonized standards:
EN61326-1 (2021) – Electrical equipment for measurement, control and laboratory use. The immunity test requirements used for this Product qualification are for the equipment intended to be used in an industrial electromagnetic environment.

This product is designed and manufactured in accordance with the directive 2014/35/EU. Presumption of conformity with the essential requirements of the directive is provided by compliance with the following harmonized standard: EN 61010-1:2010 + A1:2019
In addition, this product has been tested and certified under the IECEE CB Scheme and holds a CB Test Certificate demonstrating compliance with:

IEC 61010-1:2010
IEC 61010-1:2010 / AMD1:2016

Certifying Body	Standard Number	Standard Name	Specifications	Minimum Performance Requirement Criterion

Standard Number	Standard Name	Specifications	Minimum Performance Requirement Criterion
FCC 47 CFR Part 15, Subpart B	Radiated Emissions	Class A, 30 MHz to 18 GHz
FCC 47 CFR Part 15, Subpart B	Conducted Emissions	Class A, 150 kHz-30MHz
ICES-001 Issue 5, July 2020	Radiated Emissions	CISPR 11:2015+A1:2016+A2:2019 Group 1, Class A, 30 MHz to 1 GHz
ICES-001 Issue 5, July 2020	Conducted Emissions	CISPR 11:2015+A1:2016+A2:2019 Group 1, Class A, 150 kHz to 30 MHz
CISPR 11:2015+A1:2016+A2:2019	Radiated Disturbance	Group 1 Class A (30 MHz to 1 GHz)
CISPR 11:2015+A1:2016+A2:2019	Mains terminal Disturbance voltage	Group 1 Class A , AC powered (rated input power ≤ 20kVA)
IEC 61000-3-2: 2018	Harmonic Current Emissions	Harmonic Classification A
IEC 61000-3-3 :2013 + A1:2017	Voltage Fluctuations and Flicker
IEC 6100-4-3: 2006 + AMD1: 2017 + AMD2 :2020	Radiated Electromagnetic Field Immunity	80 MHz-1000MHz: 10 V/m 1.4 GHz-6 GHz: 3 V/m 80% AM (1kHz )	A
IEC61000-4-2: 2008	Electrostatic Discharge Immunity	Contact: ±4 kV Air: ±2kV, ±4kV, ±8 kV	B
EN 61000-4-5: 2006	Surge Immunity	AC Power: ±2 KV L-PE, ±1 KV L-L I/O Ports: N/A, Communication Ports: N/A	B
IEC61000-4-4: 2012	Electrical Fast Transient/Burst Immunity	AC Power (including protective earth): ±2 kV, 5 kHz I/O signal/control (including functional earth): ±1 kV, 5 kHz	B
IEC61000-4-6: 2013	Immunity to Conducted Disturbances, Induced by Radio-Frequency Fields	AC Power (including protective earth): 0.15-80MHz, 3V RMS (unmodulated), 80% AM (1kHz) I/O signal/control (including functional earth): 0.15-80MHz, 3V RMS (unmodulated), 80% AM (1kHz)	A
IEC61000-4-11: 2020	Voltage Dips, Short Interruptions and Voltage Variation Immunity on AC Input	Voltage dip: 0% during 1 cycle Voltage dip: 40% during 10/12 cycles Voltage dip: 70% during 25/30 cycles Short Interruption: 0% during 250/300 cycles	B C C C
IEC 61010-1:2010, IEC 61010-1:2010/AMD1:2016 EN 61010-1:2010/A1 UL 61010-1 (3rd Ed.) CAN/CSA C22.2 No. 61010-1-12 JIS C 1010-1 (2019) Including applicable national differences.	Testing in single fault conditions Mains supply Durability of markings Determination of accessible parts Levels in normal condition Levels in single fault condition Cross-sectional area of bonding conductors Bonding impedance of permanently connected equipment Insulation requirements Enclosure rigidity test Constructional requirements Temperature Measurements Insulating material Cleaning Sound level Batteries and battery charging	4.4 5.1.3 c) 5.3 6.2 6.3.1 6.3.2 6.5.2.2 6.5.2.5 6.7 8.2 9.3.2 10 10.5.3 11.2 12.5.1 13.2.2