Documentation Home Page ◇ Hardware Home Page
Pour la documentation en FRANÇAIS, utilisez l'outil de traduction de votre navigateur Chrome, Edge ou Safari. Voir un exemple.

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

The first three tabs of the run-time panel allow the user to set individually the frequency and duty of the pulse train to be generated on the output channels.

The five SENT tabs are used to configure up to five channels in SENT mode. Each SENT tab is composed of three sub-tabs :

  • No labels

OPAL-RT TECHNOLOGIES, Inc. | 1751, rue Richardson, bureau 1060 | Montréal, Québec Canada H3K 1G6 | opal-rt.com | +1 514-935-2323