The following tables provide the generic pin assignments for the OP4510 V2’s DB37 and DB9 connectors. More detailed information, tailored to specific firmware, can be found in the Integration documents provided with your order.
Before designing cables, OPAL-RT recommends using the guideline Simulator EMC cable recommendations.
DB37 Pin Assignments
DB37 pin | Channel pin assignment | DB37 | Channel pin assignment | |
---|---|---|---|---|
1 | +00 | 20 | -00 | |
2 | +01 | 21 | -01 | |
3 | +02 | 22 | -02 | |
4 | +03 | 23 | -03 | |
5 | +04 | 24 | -04 | |
6 | +05 | 25 | -05 | |
7 | +06 | 26 | -06 | |
8 | +07 | 27 | -07 | |
9 | +08 | 28 | -08 | |
10 | +09 | 29 | -09 | |
11 | +10 | 30 | -10 | |
12 | +11 | 31 | -11 | |
13 | +12 | 32 | -12 | |
14 | +13 | 33 | -13 | |
15 | +14 | 34 | -14 | |
16 | +15 | 35 | -15 | |
17 | +12V* | 36 | DGND | |
18 | Vuser | 37 | Vrtn | |
19 |
* Non-isolated, limited to 400mA
DB9 Pin Assignments
DB9F Pin | RS422 OUT CH 00-02 | DB9F Pin | RS422 IN CH00-02 | DB9F Pin | RS422 OUT CH 03-05 | DB9F Pin | RS422 IN CH03-05 | |
---|---|---|---|---|---|---|---|---|
1 | TX0+ | 1 | RX0+ | 1 | TX3+ | 1 | RX3+ | |
2 | TX1+ | 2 | RX1+ | 2 | TX4+ | 2 | RX4+ | |
3 | TX2+ | 3 | RX2+ | 3 | TX5+ | 3 | RX5+ | |
4 | N.C | 4 | N.C | 4 | N.C | 4 | N.C | |
5 | +12V limited* | 5 | +12V limited* | 5 | +12V limited* | 5 | +12V limited* | |
6 | TX0- | 6 | RX0- | 6 | TX3- | 6 | RX3- | |
7 | TX1- | 7 | RX1- | 7 | TX4- | 7 | RX4- | |
8 | TX2- | 8 | RX2- | 8 | TX5- | 8 | RX5- | |
9 | DGND | 9 | DGND | 9 | DGND | 9 | DGND |
*Same 12V for all the connectors. 400mA total
CANbus Pin Assignments
DB25F Pin | CANbus Function | |
---|---|---|
1 | Ground to CAN driver #1 | |
2 | Ground to CAN driver #2 | |
14 | Ground to CAN driver #3 | |
15 | Ground to CAN driver #4 | |
5, 6 | CAN-L for CAN #1 | |
18, 19 | CAN-H for CAN #1 | |
7, 8 | CAN-L for CAN #2 | |
20, 21 | CAN-H for CAN #2 | |
9, 10 | CAN-L for CAN #3 | |
22, 23 | CAN-H for CAN #3 | |
11, 12 | CAN-L for CAN #4 | |
24, 25 | CAN-H for CAN #4 | |
All other pins are not connected |