Page Content
Have a question or need help?
Solution
Software Platform Compatibility
Product Selection Guide
RT-LAB
The RT-LAB CAN driver requires a CAN bus interface kit to be added to the Real-Time Simulator. The OP3411 kit includes a Kvaser CAN PCIe card and a software license, which support up to 4 CAN channels.
For additional CAN channels, additional kits may be added if PCIe slots are available.
Type | Description | Product Number(s) | Supported Simulators | |||
|---|---|---|---|---|---|---|
OP4510v2 | OP5033XG | OP5600v2 | OP5700 | |||
Driver | Driver license for CAN/CAN-FD/CANopen for RT-LAB, 4 channels. Included with all CAN bus Interface Kits. | OP3414 | YES | YES | OP5705XG | |
Add-on module | CAN bus Interface Kit, KVASER PCIe CAN 4 channels for OP451x Series* | OP3411-4510 | OP4510v2† | |||
CAN bus Interface Kit, KVASER PCIe CAN 2 channels for OP451x Series* | OP3411-451x-2CH | OP4510v2† | ||||
CAN bus Interface Kit, KVASER PCIe CAN 4 channels for OP4610XG* | OP3411-451x-4CH | OP4610XG | ||||
CAN bus Interface Kit, KVASER PCIe CAN 4 channels for OP5600* | OP3411-5600 | |||||
CAN bus Interface Kit, KVASER PCIe CAN 4 channels for OP57xx, Series, and OP503x Series* | OP3411-5707 | YES | OP5705XG | |||
OPTIONAL | Anybus AB7308 Gateway for CANopen. Contact OPAL-RT for more information.
| AB7308 | YES | YES | OP5705XG | |
* Available PCIe slot required. Note that OP4510 and OP4512 simulators only have one PCIe slot.
† The OP4510v2 support this protocol only if the operating system is OPAL-RTLinux. Note that this simulator can be migrated from Red Hat Linux to OPAL-RTLinux. Ask your local representative about the upgrade.
NI VeriStand
When using NI PXIe hardware, the PXIe8510 module supporting 2 to 6 ports is required along with the NI VeriStand Full Development System.