Documentation Home Page ◇ eHS Toolbox Home Page
Pour la documentation en FRANÇAIS, utilisez l'outil de traduction de votre navigateur Chrome, Edge ou Safari. Voir un exemple.

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 4 Next »

Unable to render {include} The included page could not be found.

SPS WORKFLOW SCHEMATIC EDITOR WORKFLOW

Introduction

This firmware includes:

  • One eHS x128 Gen5 Solver

  • One Analog Output Mapping and Rescaling (AOMR) module

  • One Analog Input Differential Rescaling (AIR) module

  • One Thermal Losses (TL) module

  • One Saturable Transformer (satXFO) module


LoadIn/DataIn/DataOut mapping


LoadIn

DataIn

DataOut

1

Config eHS

Inputs eHS

eHS Averaged

2

Scenario / Rst eHS = Status

TSDO 1 - eHS 0 to 7

eHS DownSample

3


TSDO 2 - eHS 8 to 15

Digital In 1A - 0 to 7

4

PWM 1A -  0 to 7

TSDO 3 - eHS 16 to 23

Digital In 1A - 8 to 15

5

PWM 1A -  8 to 15

TSDO 4 - eHS 24 to 31

Digital In 1A - 16 to 23

6

PWM 1A -  16 to 23

TSDO 5 - eHS 32 to 39

Digital In 1A - 24 to 31

7

PWM 1A -  24 to 31

TSDO 6 - eHS 40 to 47

eHS Period Averaged

8


TSDO 7 - eHS 48 to 55

eHS Period DownSample

9


TSDO 8 - eHS 56 to 63

TimeOn Averaged

10


TSDO 9 - eHS 64 to 71

TimeOn DownSample

11


Digital Out 1B - SDO 0 to 7

Thermal Losses

12

Config AOMR

Digital Out 1B - SDO 8 to 15

Analog In 2A - 0 to 7

13

eHS PWM 1 - eHS 24 to 31

Digital Out 1B - SDO 16 to 23

Analog In 2A - 8 to 15

14

eHS PWM 2 - eHS 0 to 7

Digital Out 1B - SDO 24 to 31


15

eHS PWM 3 - eHS 8 to 15



16

eHS PWM 4 - eHS 16 to 23



17

Config eHS AIR



18




19


AOMR/ Analog Out 2B -  0 to 7


20


Analog Out 2B -  8 to 15


21

Config Thermal Losses



22

SFP



23

Lookup Table Config

eHS PWM 1 -  0 to 7


24


eHS PWM 2 -  8 to 15


25


eHS PWM 3 -  16 to 23


26


eHS PWM 4 -  24 to 31


27


eHS SWG


28




29




30




31




32




33


Thermal Losses


34


SFP


35


LED



System Overview


Unable to render {include} The included page could not be found.


eHS solver

SPS WORKFLOW SPECIFIC

Unable to render {include} The included page could not be found.

Connectivity

SPS WORKFLOW SPECIFIC

Source Type

Source Index

Source Name

Details

Input

0

CPU Input


1

eHS Analog In

Slot 2A - Ch00-15

2

Data stream from SFP #00


3

Sine Wave Generator


Gate

0

Digital Input

Slot 1A - Ch00-31

1

PWM


2

CPU Gating Signal

TSDO 0-32

SPS WORKFLOW SPECIFIC

To contextualize the Input and Gate Configuration table with this firmware configuration, the eHS firmware config tab must be configured with the following custom input source enumeration:

{'CPU Model',0,128;'Sine Wave Generator',3,32;'Analog In',1,16;'SFP',2,32}

And this custom gate sources enumeration:

{'CPU Model',2,32;'Digital Inputs',0,32;'PWM',1,32}


Unable to render {include} The included page could not be found.

Communication port configuration for the Thermal Losses (TL) block


Thermal Losses

Data In Port Number

33

Load In Port Number

21

Data Out Port Number

11


Unable to render {include} The included page could not be found.

Communication port configuration for the Analog Output Mapping and Rescaling (AOMR) block


AOMR - Slot 2B

Version

V2

Data In Port Number

19

Load In Port Number

12


Unable to render {include} The included page could not be found.

Communication port configuration for the Analog Input Differential Rescaling (AIR) block


AIR - Slot 2A

Channels

Ch00-15

Load In Port Number

17

AOMR Output

Lane Index

Signal Source

Details

0

eHS Outputs

eHS Y01-128

5

Data Stream from SFP #01



Unable to render {include} The included page could not be found.

Communication port configuration for the SFP mapping and communication block


SFP - Channel 0

Data In Port Number

34

Load In Port Number

22


Unable to render {include} The included page could not be found.
Unable to render {include} The included page could not be found.
Unable to render {include} The included page could not be found.

Communication port configuration for the Analog Input (AI) block


Slot 2A 

Channels

Ch00-07

Ch08-15

Data Out Port Number

12

13

Connector Pin Assignment

Please refer to your hardware documentation

Hardware Pin assignment


Unable to render {include} The included page could not be found.
Unable to render {include} The included page could not be found.
Unable to render {include} The included page could not be found.

Communication port configuration for the Analog Output (AO) block


Slot 2B

Channels

Ch00-07

Ch08-15

Data In Port Number

19

20

Connector Pin Assignment

Please refer to your hardware documentation

Hardware Pin assignment


Unable to render {include} The included page could not be found.
Unable to render {include} The included page could not be found.
Unable to render {include} The included page could not be found.

Communication port configuration for the Digital Input (DI) block


Slot 1A 

Channels

Ch00-07

Ch08-15

Ch16-23

Ch24-31

Data Out Port Number

3

4

5

6

Connector Pin Assignment

Please refer to your hardware documentation

Hardware Pin assignment


Unable to render {include} The included page could not be found.
Unable to render {include} The included page could not be found.
Unable to render {include} The included page could not be found.

Communication port configuration for the Digital Output (DO) block


Slot 1B 

Channels

Ch00-07

Ch08-15

Ch16-23

Ch24-31

Data In Port Number

11

12

13

14

Load In Port Number

4

5

6

7

Connector Pin Assignment

Please refer to your hardware documentation

Hardware Pin assignment





  • No labels

OPAL-RT TECHNOLOGIES, Inc. | 1751, rue Richardson, bureau 1060 | Montréal, Québec Canada H3K 1G6 | opal-rt.com | +1 514-935-2323
Follow OPAL-RT: LinkedIn | Facebook | YouTube | X/Twitter