On this page:
The positive sequence voltage source is an ideal voltage source behind an internal series impedance. The parameter values for V, Rs, and Xs are in p.u.
Voltage Source parameters
Symbol | Description | Unit |
| ID | Source name | a unique name |
|---|---|---|
Bus | Bus name (Bus ID) | a unique name |
Voltage (pu) | Nominal voltage magnitude | p.u. |
Angle (deg) | Voltage angle | Degree |
Rs (pu) | Series resistance | p.u. |
Xs (pu) | Series reactance | p.u. |
Available I/O pins
No | Pin Description | Pin Type | Value/Unit | Instruction |
1 | Set/Get internal voltage magnitude of Vsource | I/O | p.u. | VsourceID/Vmag |
2 | Set/Get internal voltage angle of Vsource | I/O | Degree | VsourceID/Vang |
3 | Set/Get internal resistance and reactance of Vsource | I/O | p.u. (network base) | VsourceID/resistance VsourceID/reactance |
| 4 | Get injected current magnitude | O | p.u. | VsourceID/Imag |
| 5 | Get injected current angle | O | Degree | VsourceID/Iang |