SCHEMATIC EDITOR WORKFLOW
eHS licence class is counted over 5 different kind of criteria.
Number of Switches
Number of sources
Number of outputs
Number of non-linear components
Note: Some high level components, such as machines, contains sources, outputs and switches
Component | Switch | Source | Output 1 | Passive / Non-Linear | States | |
---|---|---|---|---|---|---|
| 0 | 1 | 0 | 0 | 0 | None |
| 0 | 0 | 1 | 0 | 0 | None |
| 0 | 0 | 0 | 0 | 0 | None |
| 0 | 0 | 0 | 0 | 1 | None |
| 0 | 0 | 0 | 0 | 2 | None |
| 0 | 1 | 0 | 1 | 1 | None |
| 1 | 0 | 0 | 0 | 0 | None |
Half-Bridge converter | 2 | 0 | 0 | 0 | 0 | None |
3-Level NPC Arm | 4 | 0 | 0 | 0 | 0 | None |
3-Level T-Type Arm | 4 | 0 | 0 | 0 | 0 | None (eHS Gen5 Specific) |
Single Phase Cycloconverter | 8 | 0 | 0 | 0 | 0 | None (eHS Gen5 Specific) |
Single Phase Ideal Two Winding Transformer | 0 | 0 | 0 | 0 | 3 | None |
Single Phase Ideal Three Winding Transformer | 0 | 0 | 0 | 0 | 4 | None |
Single Phase Ideal Two Winding Mutual Inductance | 0 | 0 | 0 | 0 | 2 | None |
Three Winding Mutual Inductance | 0 | 0 | 0 | 0 | 3 | None |
Saturable Transformer | 0 | 1 | 0 | 1 | 3 | None |
| 0 | 2 | 3 | 0 | 3 |
|
| 0 | 2 | 3 | 0 | 3 |
|
| 0 | 4 | 6 | 0 | 6 |
|
Pi Section Line | 0 | 0 | 0 | 0 | 2 X NBSECTION +1 | None |
FD Line 1 Phase | 0 | 2 | 0 | 0 | 0 | XSG_FDLINE |
FD Line 2 Phase | 0 | 4 | 0 | 0 | 0 | XSG_FDLINE |
FD Line 3 Phase | 0 | 6 | 0 | 0 | 0 | XSG_FDLINE |
FD Line 4 Phase | 0 | 8 | 0 | 0 | 0 | XSG_FDLINE |
FD Line 6 Phase | 0 | 12 | 0 | 0 | 0 | XSG_FDLINE |
FD Line 12 Phase | 0 | 24 | 0 | 0 | 0 | XSG_FDLINE |
Stubline | 0 | 1 | 1 | 0 | 0 | None |
| 0 | 0 | 0 | 0 | 2 | HIGH_PERFORMANCE |
| 0 | 0 | 0 | 0 | 4 | HIGH_PERFORMANCE |
| 0 | 0 | 0 | 0 | 6 | HIGH_PERFORMANCE |
1 Custom Models outputs are always connected and counted as low latency output for performance reasons. Any Custom model measurement will not be counted toward output limitation.