The OP8213 is a 32-channel interface with RJ45 connectors. Each RJ45 connector gives access to a group of four signals. It does not apply any conditioning to the signals coming from or going to the simulator.
Front Plate
Pins Assignment
Two DB37 cables must be connected to the back of the interface in order to use all 32 channels. The pins assignment of each DB27 connector is as follows :
DB37 P1-1 | Channel | DB37 P1-1 | Channel | RJ45 | DB37 P1-2 | Channel | DB37 P1-2 | Channel | RJ45 | ||
|---|---|---|---|---|---|---|---|---|---|---|---|
1 | +CH00 | 20 | -CH00 | 0-3 | 1 | +CH00 | 20 | -CH00 | 16-19 |
|
|
2 | +CH01 | 21 | -CH01 | 2 | +CH01 | 21 | -CH01 | ||||
3 | +CH02 | 22 | -CH02 | 3 | +CH02 | 22 | -CH02 | ||||
4 | +CH03 | 23 | -CH03 | 4 | +CH03 | 23 | -CH03 | ||||
5 | +CH04 | 24 | -CH04 | 4-7 | 5 | +CH04 | 24 | -CH04 | 20-23 | ||
6 | +CH05 | 25 | -CH05 | 6 | +CH05 | 25 | -CH05 | ||||
7 | +CH06 | 26 | -CH06 | 7 | +CH06 | 26 | -CH06 | ||||
8 | +CH07 | 27 | -CH07 | 8 | +CH07 | 27 | -CH07 | ||||
9 | +CH08 | 28 | -CH08 | 8-11 | 9 | +CH08 | 28 | -CH08 | 24-27 | ||
10 | +CH09 | 29 | -CH09 | 10 | +CH09 | 29 | -CH09 | ||||
11 | +CH10 | 30 | -CH10 | 11 | +CH10 | 30 | -CH10 | ||||
12 | +CH11 | 31 | -CH11 | 12 | +CH11 | 31 | -CH11 | ||||
13 | +CH12 | 32 | -CH12 | 12-15 | 13 | +CH12 | 32 | -CH12 | 28-31 | ||
14 | +CH13 | 33 | -CH13 | 14 | +CH13 | 33 | -CH13 | ||||
15 | +CH14 | 34 | -CH14 | 15 | +CH14 | 34 | -CH14 | ||||
16 | +CH15 | 35 | -CH15 | 16 | +CH15 | 35 | -CH15 | ||||
17 | 36 | 17 | 36 | ||||||||
18 | 37 | 18 | 37 | ||||||||
19 | 19 | ||||||||||
