Versions Compared

Old Version 8

changes.mady.by.user Luc Marcil

Saved on

compared with

New Version 9

changes.mady.by.user Luc Marcil

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Name

This field allows user to specify a unique name for each solver where more than one exists in a Simulink model.

Input file format

The user can choose between Excel, PSS/E, CYME and PowerFactory input file formats. Different configurations get activated in the mask depending on this selection.

See the figures below for examples of various inputs.

Complete network or I/O pins v2.0 file (*.xlsx)

This is a common field used to configure the network data and incoming/outgoing pins for the Solver block. User can select the file directly using the Select button or open the file specified in this field using the Open button.

Refresh netlist only when the simulation starts

Large networks may be lengthy to read and parse. This option delays the conversion process until the simulation starts.

When unchecked, the conversion is done when OK is clicked instead. This field is common to all input formats.

Requirements: Must have Opal One installed, MATLAB 2018B or 2021A and I/O pins files v2.0 in xlsx extension.https://opal-rt.atlassian.net/wiki/spaces/EUD/pages/23199755/Requirements?atl_f=content-tree

...

Note

Note: 

  • The name of the OPAL files that are created and transferred to the target is based on the name of the Excel file (*.xlsx file name).

  • The input files and the Simulink model should be saved in one single folder, to which the MATLAB current working directory is set.

  • Any change in the input files content or in the mask are applied when the network data is converted to OPAL format.

...