Page Content
...
The dust filter must never be clogged to ensure a good air flow inside the unit and prevent overheating.
Effective cooling is necessary to the optimal performance of the unit.
| Note |
|---|
Overheating can damage the unit. |
| Note |
|---|
Avoid using the unit in a dusty environment. |
Dust Filter and Air Exhaust Cleanup
...
To access the dust filter:
| Note |
|---|
Turn off the unit and disconnect the power cord |
If the unit is in a rack, remove the rack screws, pull out the front of the unit or remove it completely from the rack.
Unscrew and remove the IRG-B/1PPS connector cap.
Removes the following screws:
3 screws at the bottom of the front panel
4 screws on top of the front panel
2 screws on each side of the front panel
If rack brackets are installed, only remove the 2 frontmost screws, near the bracket flange
Pull out the front panel
...