Page Content
Table of Contents | ||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
...
For a simple functional test of your system, you can execute one of the model examples provided as demos.
For example, you can load and execute the “rtdemo1” demo model, which is a PID controller. This model does not use the I/Os of your system.
If this model is running as expected, you know that your system basic configuration is correct.
The procedure is explained in this page of the RT-LAB user documentation: https://opal-rt.atlassian.net/wiki/x/MoiPC
...
We provide you the integration test model used to test your system in the factory.
Info |
---|
Please, refer to this page in the RT-LAB user documentation for a detail: https://opal-rt.atlassian.net/wiki/x/_QiPC |
Note |
---|
The model includes the bitstream you should always use. |
Download the integration test model file below on your PC.
...
Your bundle I/O connectors are described here: https://opal-rt.atlassian.net/wiki/x/vAA2Lw HIL2GO-100 - OP4512 I/O System
Connecting the I/O loopback kit is explained here: https://opal-rt.atlassian.net/wiki/spaces/PHDGD/pages/144662112/OP5707XG+Installation+and+Configuration#Connecting-the-I%2FO-Loopback-Kit
Also read this knowledge base article : How to power the different DB37 boards for digital outputs
Note |
---|
Before connecting the cables, make sure that the voltages or other electrical specifications are compatible with OPAL-RT DB37/DB9 specifications of I/O modules OP5330, OP5342 and, OP5369. See section HIL2GO-100 - OP4512 I/O System for all DB37 and DB9 pin assignment. |
Use the Integration Test Model (Loopback Test)
...