The following section shows the relationship between the I/O blocks in the RT-LAB model and the signal conditioning modules installed on the OP4512 simulator.
They are divided by groups and sections, and each is clearly identified in the illustrations.
...
The RT-LAB’s Simulink blocks used to access the OP4512 simulator I/Os use the following ID nomenclature:
SlotX.ModuleY.SubSectionZ.
To map the Simulink ID to the physical I/Os in the OP4512 (rear panel), the user is advised to use the nomenclature correspondence in the table above.
For example, in Simulink, Slot1. ModuleA. Subsection3 is equivalent to Group1.A.(16-23) on the OP4512 simulator.
...