Versions Compared

Old Version 1

changes.mady.by.user Sylvain Ménard

Saved on

compared with

New Version Current

changes.mady.by.user Sylvain Ménard

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Shunt L-C

Description

Grounded inductor and capacitor.



Panel
borderColor#627781
titleColor#627781
borderWidth1
borderStylesolid
titleTable of Contents

Table of Contents
indent20px
stylecircle
printablefalse


Mask and Parameters

 

NameDescriptionUnitVariable = {Possible Values}
Connection Type

For shunt elements, three types of connections are available for three-phase connections:

  • Ground Y Connection: one end of the shunt RL element is connected to a bus and the other end to the ground.

Y Ground Connection of a Shunt RL Element, as shown in a diagram (a) and in a reality (b)

  • Floating Y Connection: one end of each RLC branch of the RLC element is connected to a phase at the end of the bus, while the other ends are connected together, but not to the ground.

Floating Y Connection of a Shunt RL Element, as Shown in a Diagram (a) and in Reality (b)

  • Delta Connection (or triangle): In the case of a Delta connection, the three RL branches of a three-phase element are Delta connected, and each top of the Delta is connected to a phase of the bus.

Delta Connection of a Shunt RL Element, as Shown in a Diagram (a) and in Reality (b)


LInductance value for each phase.H
CCapacitor value for each phase.F
Base PowerTotal Base power.MVA
Base VoltageBase voltage rms LL if the shunt L-C is connected to a 3-phase bus and rms LN is only one phase is connected.kV
Base FrequencyBase frequency.Hz
Enable User Initial Value


Initial CurrentInitial current, cannot be modified while the simulation is running.A
Initial VoltageInitial current, cannot be modified while the simulation is running.V