...

Figure 1: Synchronous machine configuration settings

Simulation and Results

As part of the example model setup, the user can perform two types of scenarios, each scenario has a template in ScopeView to display the signals.

Scenario 1: Model running without events

The first scenario consists of the IEEE 9 Bus model running without any type of failure or event. The following are the results from ScopeView.

...

Figure 5: Active and reactive power generated by synchronous machines

Scenario 2: Three-phase fault on Bus 4

The second scenario is about introducing a three-phase fault on Bus 4 at 0.05s by 0.02s. The user can change these settings by going into the fault subsystem and changing the values of T1 and T2, configuring the fault activation and clear times, respectively.

...