Table of Contents

maxLevel	1

Include Page

	INTPINT:General SectionINT
	PINT:General Section

Status

colour	Blue
title	SCHEMATIC EDITOR WORKFLOW

Introduction

This firmware includes:

One eHS x128 Gen5 Solver
One Analog Output Mapping and Rescaling (AOMR) module
One Analog Input Differential Rescaling (AIR) module
One Thermal Losses (TL) module
One Saturable Transformer (satXFO) module

LoadIn/DataIn/DataOut mapping

	LoadIn	DataIn	DataOut
1	Config eHS	Inputs eHS	eHS Averaged
2	Scenario / Rst eHS = Status	TSDO 1 - eHS 0 to 7	eHS DownSample
3		TSDO 2 - eHS 8 to 15	Digital In 2A - 0 to 7
4	PWM 2B - 0 to 7	TSDO 3 - eHS 16 to 23	Digital In 2A - 8 to 15
5	PWM 2B - 8 to 15	TSDO 4 - eHS 24 to 31	Digital In 2A - 16 to 23
6	PWM 2B - 16 to 23	TSDO 5 - eHS 32 to 39	Digital In 2A - 24 to 31
7	PWM 2B - 24 to 31	TSDO 6 - eHS 40 to 47	Digital In 4A - 0 to 7
8	PWM 4B - 0 to 7	TSDO 7 - eHS 48 to 55	Digital In 4A - 8 to 15
9	PWM 4B - 8 to 15	TSDO 8 - eHS 56 to 63	Digital In 4A - 16 to 23
10	PWM 4B - 16 to 23	TSDO 9 - eHS 64 to 71	Digital In 4A - 24 to 31
11	PWM 4B - 24 to 31	Digital Out 2B - SDO 0 to 7	Analog In 1B - 0 to 7
12	Config AOMR	Digital Out 2B - SDO 8 to 15	Analog In 1B - 8 to 15
13	eHS PWM 1 - eHS 24 to 31	Digital Out 2B - SDO 16 to 23	eHS Period Averaged
14	eHS PWM 2 - eHS 0 to 7	Digital Out 2B - SDO 24 to 31	eHS Period DownSample
15	eHS PWM 3 - eHS 8 to 15	Digital Out 4B - SDO 0 to 7	TimeOn Averaged
16	eHS PWM 4 - eHS 16 to 23	Digital Out 4B - SDO 8 to 15	Thermal Losses
17	Config AIR	Digital Out 4B - SDO 16 to 23	TimeOn DownSample
18		Digital Out 4B - SDO 24 to 31
19		AOMR/Analog Out 1A - 0 to 7
20		Analog Out 1A - 8 to 15
21	Config Thermal Losses	Analog Out 3A - 0 to 7
22	SFP	Analog Out 3 - 8 to 15
23		eHS PWM 1 - 0 to 7
24		eHS PWM 2 - 8 to 15
25		eHS PWM 3 - 16 to 23
26		eHS PWM 4 - 24 to 31
27		eHS SWG
28
29
30
31		Analog Out 3B - 0 to 7
32		Analog Out 3B - 8 to 15
33		Thermal Losses
34		SFP

System Overview

Include Page

	INTPINT:Extensive I/O compatibility (Polymorphism)INT
	PINT:Extensive I/O compatibility (Polymorphism)

eHS solver

Status

colour	Green
title	sps workflow specific

Include Page

	INTPINT:SPS - eHS BlockINT
	PINT:SPS - eHS Block

Include Page

	INT:Extensive I/O compatibility (Polymorphism)
	INT:Extensive I/O compatibility (Polymorphism)

Connectivity

Status

colour	Green
title	sps workflow specific

Source Type	Source Index	Source Name	Details
Input	0	CPU Input
	1	eHS Analog In	Slot 1B - Ch00-15
	2	Data Stream from SFP #00
	3	Sine Wave Generator
	4	Saturable Transformer
Gate	0	Digital Input	Slot 2A - Ch00-31
	1	PWM
	2	CPU Gating Signal
	3	Digital Input	Slot 4A - Ch00-31

Status

colour	Green
title	sps workflow specific

To contextualize the Input and Gate Configuration table with this firmware configuration, the eHS firmware config tab must be configured with the following custom input source enumeration:

Code Block
{'CPU Model',0,128;'Analog In',1,16;'Sine Wave Generator',3,32;'SFP',2,16;'Saturable Transformer',4,32}

And this custom gate sources enumeration:

Code Block
{'CPU Model',2,72;'Digital Inputs 2A',0,32;'PWM',1,32;'Digital Inputs 4A',0,32}

Include Page

	INTPINT:Thermal Losses firmware block sectionINT
	PINT:Thermal Losses firmware block section

Communication port configuration for the Thermal Losses (TL) block

	Thermal Losses
Data In Port Number	33
Load In Port Number	21
Data Out Port Number	16

Include Page

	INTPINT:AOMR firmware block sectionINT
	PINT:AOMR firmware block section

Communication port configuration for the Analog Output Mapping and Rescaling (AOMR) block

	AOMR - Slot 1A/3B
Version	V2
Data In Port Number	19
Load In Port Number	12

AOMR Output

Lane Index	Signal Source	Details
0	eHS Outputs	eHS Y01-128
1	Data Stream from SFP #01

Include Page

	INTPINT:AIR firmware block sectionINT
	PINT:AIR firmware block section

Communication port configuration for the Analog Input Differential Rescaling (AIR) block

	AIR -Slot 1B
Channels	Ch00-15
Load In Port Number	17

Include Page

	INTPINT:SFP Mapping and Communication block sectionINT
	PINT:SFP Mapping and Communication block section

Communication port configuration for the SFP mapping and communication block

	SFP - Channel 0
Data In Port Number	34
Load In Port Number	22

Include Page

	INTPINT:Analog In blockINT
	PINT:Analog In block

Include Page

	INTPINT:Analog In block sectionINT
	PINT:Analog In block section

Include Page

	INTPINT:OPAL-Board Digital OutINT
	PINT:OPAL-Board Digital Out

Communication port configuration for the Analog Input (AI) block

	Slot 1B
Channels	Ch00-07	Ch08-15
Data Out Port Number	11	12

Connector Pin Assignment

Please refer to your hardware documentation

Hardware Pin assignment

Include Page

	INTPINT:Analog Out blockINT
	PINT:Analog Out block

Include Page

	INTPINT:Analog Out block sectionINT
	PINT:Analog Out block section

Include Page

	INTPINT:OPAL-Board Digital OutINT
	PINT:OPAL-Board Digital Out

Communication port configuration for the Analog Output (AO) block

	Slot 1A		Slot 3B		Slot 3A
Channels	Ch00-07	Ch08-15	Ch00-07	Ch08-15	Ch00-07	Ch08-15
Data In Port Number	19	20	21	22	31	32

Connector Pin Assignment

Please refer to your hardware documentation

Hardware Pin assignment

Include Page

	INTPINT:Digital In blockINT
	PINT:Digital In block

Include Page

	INTPINT:Digital In block sectionINT
	PINT:Digital In block section

Include Page

	INTPINT:OPAL-Board Digital OutINT
	PINT:OPAL-Board Digital Out

Communication port configuration for the Digital Input (DI) block

	Slot 2A				Slot 4A
Channels	Ch00-07	Ch08-15	Ch16-23	Ch24-31	Ch00-07	Ch08-15	Ch16-23	Ch24-31
Data Out Port Number	3	4	5	6	7	8	9	10

Connector Pin Assignment

Please refer to your hardware documentation

Hardware Pin assignment

Include Page

	INTPINT:Digital Out blockINT
	PINT:Digital Out block

Include Page

	INTPINT:Digital Out block sectionINT
	PINT:Digital Out block section

Include Page

	INTPINT:OPAL-Board Digital OutINT
	PINT:OPAL-Board Digital Out

Communication port configuration for the Digital Output (DO) block

	Slot 2B				Slot 4B
Channels	Ch00-07	Ch08-15	Ch16-23	Ch24-31	Ch00-07	Ch08-15	Ch16-23	Ch24-31
Data In Port Number	11	12	13	14	15	16	17	18
Load In Port Number	4	5	6	7	8	9	10	11

Connector Pin Assignment

Please refer to your hardware documentation

Hardware Pin assignment

Versions Compared

Old Version 3

New Version Current

Key

Introduction

System Overview

eHS solver

Connectivity

Communication port configuration for the Thermal Losses (TL) block

Communication port configuration for the Analog Output Mapping and Rescaling (AOMR) block

AOMR Output

Communication port configuration for the Analog Input Differential Rescaling (AIR) block

Communication port configuration for the SFP mapping and communication block

Communication port configuration for the Analog Input (AI) block

Connector Pin Assignment

Communication port configuration for the Analog Output (AO) block

Connector Pin Assignment

Communication port configuration for the Digital Input (DI) block

Connector Pin Assignment

Communication port configuration for the Digital Output (DO) block

Connector Pin Assignment

Page Comparison

Versions Compared

Old Version 3

New Version Current

Key

Introduction

System Overview

eHS solver

Connectivity

Communication port configuration for the Thermal Losses (TL) block

Communication port configuration for the Analog Output Mapping and Rescaling (AOMR) block

AOMR Output

Communication port configuration for the Analog Input Differential Rescaling (AIR) block

Communication port configuration for the SFP mapping and communication block

Communication port configuration for the Analog Input (AI) block

Connector Pin Assignment

Communication port configuration for the Analog Output (AO) block

Connector Pin Assignment

Communication port configuration for the Digital Input (DI) block

Connector Pin Assignment

Communication port configuration for the Digital Output (DO) block

Connector Pin Assignment