...
| Name | Name that will be used to identify the signal associated to the read/write operation in the Sensor form. |
| Operation type | Type of operation to perform. See the list of supported operations in the "Supported features" section. |
| Operation code | Read-only field that gives the hexadecimal code of the configured Modbus operation. |
| Start address | Address at which will begin the read/write operation. |
| Item number | Number of coils/registers that will be read/written. |
| Interpreted as | For coils and discrete input: Only bit is supported. For all types of registers: Unsigned integers (16 bits & 32 bits), signed integers (16 bits & 32 bits) and single-precision floating-point (32 bits) are supported. |
| Triggered operation | Trigger read/write for non-cyclic operation. |
...