Modbus Master

The Modbus master I/O interface allows connecting to various Modbus slaves and send read/write commands. The interface can operate over TCP/IP using an Ethernet physical link or over RTU using a serial link. Using a standard network interface card, this protocol can be easily and rapidly integrated into any simulation model.

With the proper user configuration, a driver is initialized on the target simulator at the start of the simulation and connects with all configured slave devices to begin data transmission.

Communications protocols can be configured in the I/O Interface Configuration tool that can be opened from HYPERSIM Ribbon Options.

For more information on the general use of the I/O Interface Configuration, see also I/O Interfaces.