Table of Contents |
---|
The OP5332 module provides 16 isolated analog output channels, sampled at 2MS/s and producing ±16V output values.
Background Color | ||
---|---|---|
| ||
|
Main Features
- 8 pairs of isolated analog output channels (16 channels total)
- 16-bit resolution
- Simultaneous sampling at 2 MS/s
- Voltage range ±16V
- Maximum current 10mA
- Factory-calibrated
Channel description
Each channel uses a dedicated 16-bit resolution digital-to-analog converter.
All outputs are sampled simultaneously at 2 MS/s, giving a total throughput of 32 MS/s.
The channels are isolated by pair.
Current/voltage characteristics
The output signal voltage range is ±16 volts.
The maximum current per channel is ±10 mA.
Calibration
The card is factory-calibrated to ensure accurate output values with a maximum of ±10 mV absolute error.
Background Color | ||
---|---|---|
| ||
To ensure the ±10mV precision, a warm-up time of 10mn is necessary. |
Typical Use Cases
The following diagram provides an example of a typical setup using the OP5332. An analog output signal is sent to the unit under test. The maximum current rating of the signal is 10mA.
Background Color | ||
---|---|---|
| ||
For compatibility of this card, please consult the Software compatibility and Hardware compatibility tables. |