...
...
...
...
...
...
1
...
+OUT00
...
20
...
-OUT00
...
2
...
+OUT01
...
21
...
-OUT01
...
3
...
+OUT02
...
22
...
-OUT02
...
4
...
+OUT03
...
23
...
-OUT03
...
5
...
+OUT04
...
24
...
-OUT04
...
6
...
+OUT05
...
25
...
-OUT05
...
7
...
+OUT06
...
26
...
-OUT06
...
7
...
+OUT07
...
27
...
-OUT07
...
9
...
+OUT08
...
28
...
-OUT08
...
10
...
+OUT09
...
29
...
-OUT09
...
11
...
+OUT10
...
30
...
-OUT10
...
12
...
+OUT11
...
31
...
-OUT11
...
13
...
+OUT12
...
32
...
-OUT12
...
14
...
+OUT13
...
33
...
-OUT13
...
15
...
+OUT14
...
34
...
-OUT14
...
16
...
+OUT15
...
35
...
-OUT15
...
The following tables provide the general pin assignments for the OP5332 DB37 connectors.
| Info |
|---|
Detailed pin assignments for all connectors can be found in the System Description document provided with your order, or refer to the general pin assignment of your specific unit. |
| Note |
|---|
Before designing cables, OPAL-RT recommends using the guideline Simulator EMC cable recommendations. |
Group A and B - Connector P1 - Channel 00 to 15 (Connector P2 not used) |
| |||
|---|---|---|---|---|
DB37F Pin | Assignment | DB37F Pin | Assignment | |
1 | +AOUT00 | 20 | GND_ISO0** | |
2 | +AOUT01 | 21 | GND_ISO0 | |
3 | +AOUT02 | 22 | GND_ISO1 | |
4 | +AOUT03 | 23 | GND_ISO1 | |
5 | +AOUT04 | 24 | GND_ISO2 | |
6 | +AOUT05 | 25 | GND_ISO2 | |
7 | +AOUT06 | 26 | GND_ISO3 | |
7 | +AOUT07 | 27 | GND_ISO3 | |
9 | +AOUT08 | 28 | GND_ISO4 | |
10 | +AOUT09 | 29 | GND_ISO4 | |
11 | +AOUT10 | 30 | GND_ISO5 | |
12 | +AOUT11 | 31 | GND_ISO5 | |
13 | +AOUT12 | 32 | GND_ISO6 | |
14 | +AOUT13 | 33 | GND_ISO6 | |
15 | +AOUT14 | 34 | GND_ISO7 | |
16 | +AOUT15 | 35 | GND_ISO7 | |
17 | Refer to unit’s pin assignment* | 36 | Refer to unit’s pin assignment* | |
18 | Reserved | 37 | Reserved | |
19 | ||||
...
Refer to unit’s pin assignment* |
* Unit can be a Real-time Simulator or an FPGA Processor and IO Expansion Unit from the OP5000 series.
** GND_ISO: Isolated ground