OP5332 DB37F Pin Assignment

The following tables provide the general pin assignments for the OP5332 DB37 connectors.

Detailed pin assignments for all connectors can be found in the System Description document provided with your order, or refer to the general pin assignment of your specific unit.

Before designing cables, OPAL-RT recommends using the guideline Simulator EMC cable recommendations.

Group A and B - Connector P1 - Channel 00 to 15 (Connector P2 not used)
DB37F Pin	Assignment	DB37F Pin	Assignment
1	+AOUT00	20	GND_ISO0**
2	+AOUT01	21	GND_ISO0
3	+AOUT02	22	GND_ISO1
4	+AOUT03	23	GND_ISO1
5	+AOUT04	24	GND_ISO2
6	+AOUT05	25	GND_ISO2
7	+AOUT06	26	GND_ISO3
7	+AOUT07	27	GND_ISO3
9	+AOUT08	28	GND_ISO4
10	+AOUT09	29	GND_ISO4
11	+AOUT10	30	GND_ISO5
12	+AOUT11	31	GND_ISO5
13	+AOUT12	32	GND_ISO6
14	+AOUT13	33	GND_ISO6
15	+AOUT14	34	GND_ISO7
16	+AOUT15	35	GND_ISO7
17	Refer to unit’s pin assignment*	36	Refer to unit’s pin assignment*
18	Reserved	37	Reserved
19	Refer to unit’s pin assignment*

* Unit can be a Real-time Simulator or an FPGA Processor and IO Expansion Unit from the OP5000 series.
** GND_ISO: Isolated ground