...
Name | This field allows user to specify a unique name for each solver where more than one exists in a Simulink model. |
|---|---|
Input file format | The user can choose between Excel, PSS/e, CYME and PowerFactory input file formats. Different configurations get activated in the mask depending on this selection. See the figures below for examples of various inputs. |
Use UDB | When checked, solver imports the data files using UDB (UnifiedDatabase) instead of MATLAB. This feature is currently limited to PSS/e input data with no FMU. Requirements: Must have installation of UDB v3.6.0.2 or above, MATLAB 2018B or 2021A and above and I/O pins files in xlsx extension. |
Complete network or I/O pins file (*.xls or *.xlsx) | This is a common field used to configure the network data and incoming/outgoing pins for the Solver block. User can select the file directly using the Select button or open the file specified in this field using the Open button. |
Refresh netlist only when the simulation starts | Large networks may be lengthy to read and parse. This option delays the conversion process until the simulation starts. When unchecked, the conversion is done when OK is clicked instead. This field is common to all input formats. |
...