Page Content
| Table of Contents | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Software Requirements
Microsoft Windows Compatibility
Windows 10 is only officially supported starting with RT-LAB 11.2.0 and ARTEMiS 7.2.0.
WIN 7 | WIN 8 | WIN 10 | WIN 11 | |
|---|---|---|---|---|
ARTEMiS 7.1 | Yes | Yes | No | |
ARTEMiS 7.2 | Yes | Yes | Yes | |
ARTEMiS 7.3 | Yes | Yes | Yes | |
ARTEMiS 7.4 | Yes | Yes | Yes | |
ARTEMiS 7.5 | Yes | Yes | Yes | |
ARTEMiS 7.6 | Yes* | Yes | Yes | |
ARTEMiS 7.7 | Yes* | Yes | Yes | From 7.7.5 |
ARTEMiS 7.8 | No | No | Yes | Yes |
* Partial support: Matlab R2019b is not supported by RT-LAB on Windows 7
MATLAB Compatibility
Both 32-bit and 64-bit versions of MATLAB are supported when stated in the table below, except for R2016A and later. These MATLAB versions are only available in 64-bit.
R2011b | R2012a | R2012b | R2013a | R2013b | R2014a | R2014b | R2015a (SP1) | |
|---|---|---|---|---|---|---|---|---|
ARTEMiS 7.1 | Yes | Yes | Yes | Yes | No | No | Yes | Yes |
ARTEMiS 7.2 | Yes | Yes | Yes | Yes | No | No | Yes | Yes |
ARTEMiS 7.3 | Yes | Yes | Yes | Yes | No | No | Yes | Yes |
ARTEMiS 7.4 | Yes | Yes | Yes | Yes | No | No | Yes | Yes |
ARTEMiS 7.5 | No | No | No | No | No | No | No | No |
ARTEMiS 7.6 | No | No | No | No | No | No | No | No |
ARTEMiS 7.7 | No | No | No | No | No | No | No | No |
ARTEMiS 7.8 | No | No | No | No | No | No | No | No |
R2015b | R2016a | R2016b | R2017a | R2018a | R2018b | R2019a | R2019b | R2020a | R2020b | R2021a | R2021b | R2022a | R2022b | R2023a | R2023b | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
ARTEMiS 7.1 | No | No | No | No | No | No | No | No | No | No | No | No | No | No | No | No |
ARTEMiS 7.2 | Yes | Yes | Yes | Yes | No | No | No | No | No | No | No | No | No | No | No | No |
ARTEMiS 7.3 | Yes | Yes | Yes | Yes | No | No | No | No | No | No | No | No | No | No | No | No |
ARTEMiS 7.4 | Yes | Yes | Yes | Yes | Yes | Yes | No | No | No | No | No | No | No | No | No | No |
ARTEMiS 7.5 | Yes | Yes | Yes | Yes | Yes | Yes | No | No | No | No | No | No | No | No | No | No |
ARTEMiS 7.6 | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Beta* | Beta* | No | No | No | No | No | No |
ARTEMiS 7.7 | No(1) | No(1) | No(1) | No(1) | Yes | Yes | Yes | Yes | Yes | Yes | From 7.7.2 |
From 7.7.2 |
From 7.7.3 |
From 7.7.4 | From 7.7.4 | No | ||||||||||||||
ARTEMiS 7.8 | No | No | No | No | No | Yes | No | No | No | No | Yes | Yes | Yes | Yes | Yes | Yes |
|---|
* Beta support only, may be use in RT-LAB advanced mode.
(1) The support of these Matlab/Simulink versions has been dropped starting with ARTEMiS v7.7.3.
Required Elements
Matlab: Underlying mathematical engine
Simulink: Graphical design environment
Simulink Coder: Code generator
Simscape Power Systems: electrical circuits and electromechanical devices for Simulink
Linux OS Compatibility
Red Hat Linux 5.2 OS and OPAL-RTLinux 3 may be used as a target node. Models can be executed in real-time or as pure (unsynchronized) simulations.
Red Hat Linux 5.2 OS and OPAL-RTLinux 3 may be used for real-time simulations, however, note that RT-LAB software does not yet support Red Hat Linux OS as a host computer.
RT-LAB Compatibility
RT-LAB is used to run ARTEMiS in real-time. Use the following table to get the compatible version of ARTEMiS and RT-Events.
Artemis | RT-Events | |
|---|---|---|
RT-LAB 2019.1 | 7.4.0 | 4.4.0 |
RT-LAB 2019.2 | 7.4.1 | 4.4.1 |
RT-LAB 2019.3 | 7.5.0 | 4.5.0 |
RT-LAB 2020.1 | 7.6.0 | 4.6.0 |
RT-LAB 2020.2 | 7.6.1 | 4.6.1 |
RT-LAB 2020.3 | 7.6.2 | 4.6.2 |
RT-LAB 2020.4 | 7.6.3 | 4.6.2 |
RT-LAB 2021.1 | 7.6.4 | 4.6.4 |
RT-LAB 2021.2 | 7.7.0 | 4.7.0 |
RT-LAB 2021.3 | 7.7.1 | 4.7.1 |
RT-LAB 2022.1 | 7.7.2 | 4.7.2 |
RT-LAB 2023.1 | 7.7.3 | 4.7.3 |
RT-LAB 2023.2 | 7.7.4 | 4.7.4 |
RT-LAB 2023.3 | 7.7.5 | 4.7.5 |
RT-LAB 2024.1 | 7.8.0 | 4.7.6 |