Versions Compared

Old Version 3

changes.mady.by.user Sylvain Ménard

Saved on

compared with

New Version 4

changes.mady.by.user Sylvain Ménard

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Page Content

Table of Contents
maxLevel6
minLevel1
include
outlinefalse
indent
excludePage Content
typelist
printablefalse
class

General

Product Name

32 Channels High-Range DIO

Part numbers

OP5369

Board type

Digital input/output conditioning

Form factor

Mezzanine Type B

Dimensions

6.60 cm x 12.50 cm (2.6” x 4.92”)

Hot-Plug support

No

Characteristic

Number of channels

32 IO in 4

Banks

banks, configurable as inputs or outputs

 Bank1

:

  • Bank1 : D0-

7   

  • 7

  • Bank2 : D8-

15   Bank3

  • 15

  • Bank3 : D16-

23     Bank4

  • 23

  • Bank4 : D24-31

Vuser

VUser1

  • Vuser1 for

Bank

  • banks 1 and

2      VUser2 for Bank 3 and 4INPUT DIRECTION

  • 2

  • Vuser2 for banks 3 and 4

For more information about the use of Vuser and Vrtn pleaser refer to this article in the OPAL-RT knowledge base : How to power the different DB37 boards for digital outputs.

Input Direction

Input impedance

> 100 kOhm

Reverse voltage protection

Diode

Maximum 

Maximum voltage protection

+/- 50 Volts

Detection threshold

4 programmable Schmitt trigger level step 0.118V from 0.470V to 29.4V threshold high and threshold low for each bank

Recommended levels threshold

The default thresholds are LOW = 1.5V, HIGH = 3.5V.

To improve noise immunity, a LOW level threshold of 1/3

VUser

Vuser and a HIGH level threshold of 2/3

VUser

Vuser are recommended.

Voltage range

0 to 30 Vdc

Delay Low-to-High

10 ns (implementation-dependent)                                                         

Delay High-to-Low

15 ns (implementation-dependent)                                                        

OUTPUT DIRECTION

Output Direction

Output protection

50 mA resettable fuse

Output impedance

2 to 15 Ohm

Protection thresholds

Maximum VUser + 0.5V
Minimum  -0.5V

Output voltage range

4.5 to 25Vdc Max (default internal 4.5 volts)

Logic high levels (typical) 

No load:  VUser -0.

2V   

2V
50mA :     VUser -0.9V (in OP5XXX system)    

Logic low levels (typical) 

No load:  0.

1V 

1V
50 mA:     0.9V (in OP5XXX system)

Output configuration

Push-pull 

Delay Low-to-High (typical value, implementation-dependent)

< 100ns @25°C for 

25V 

25V
< 90ns @25°C for 5 V                                      

Delay High-to-Low (typical value, implementation-dependent)

< 100ns @25°C for  25V
< 90ns @25°C for 5 V                                       

Rise / Fall time

< 40ns,   < 50ns                                   

Minimum pulse detection (resolution)

90 ns   5V
130 ns  30V

Output frequency

DC to 4MHz (see table below)

Environmental

Background Color
color#D3D3D3

Image Removed 

The OP5369 is designed

Indoor/Outdoor

Design for indoor use only

.

Module operating temperature

0 °C to 40 °C

Storage temperature

-40 °C to 85 °C

Operating humidity

10% to 90% non-condensing

Storage humidity

5% to 95% non-condensing

Pollution degree

2

Maximum altitude

2,000 m

Power requirement

15W

15 W

Maximum PWM Output Frequency for Given Number of Repetitive Signals

OP5650/OP5x07/OP5705/OP4610

OP4510

Vuser / Channel

<=25V

<=12V

<=5V

<=25V

<=12V

<=5V

1

 1 MHz

2 MHz

4 MHz

16 kHz **

2 MHz

4 MHz

5

 1 MHz

2 MHz

4 MHz

16 kHz **

1 MHz

4 MHz

15

0.3 MHz **

2 MHz

4 MHz

16 kHz **

0.5 MHz

2 MHz

32

0.3 MHz **

1 MHz

4 MHz

16 kHz **

0.5 MHz

1 MHz

**

...

0.5 MHz if T amb <= 25°C