...
OP5367-5 32 digital inputs card block
OP48H10 - Fast
Mask
OP5369 available configuration parameters
...
OP5367-5 available configuration parameters
OP48H10 - Fast available configuration parameters
Description
The mezzanine option block is used to configure the parameters of a mezzanine during the load of the simulation.
...
The following table describes the supported Mezzanine type.
| Mezzanine type | Description |
|---|---|
| OP5369 - 32DIO | With an OP5369 digital bidirectional card, the detection voltages for a rising edge (threshold high) and a falling edge (threshold low) are configurable during a load of an RT-LAB model. The values for the low and high thresholds are applicable for entire groups of 8 channels. Threshold units are volts, and the resolution is 0.1176 V. |
| OP5330 - 16 AO | With an OP5330 AO card, the maximum sampling rate for analog out is configurable during load of an RT-LAB model. The supported maximum sampling rates are 1Msps and 2Msps. In the case of 2Msps, the available channels are channel 0, 1, 4, 5 for the first subsection and channel 8, 9, 12, 13 for the second subsection. |
| OP5367-3 - 16DI/16DO | With an OP5367-3 digital bidirectional card, the detection voltages for a rising edge (threshold high) and a falling edge (threshold low) are configurable for the first 16 channels during a load of an RT-LAB model. The values for the low and high thresholds are applicable for entire groups of 8 channels. Threshold units are volts, and the resolution is 0.2022 V. |
| OP5367-5 - 16DI | With an OP5367-5 digital input card, the detection voltages for a rising edge (threshold high) and a falling edge (threshold low) are configurable for the 32 channels during a load of an RT-LAB model. The values for the low and high thresholds are applicable for entire groups of 8 channels. Threshold units are volts, and the resolution is 0.2022 V. |
| OP48H10 - Fast | With an OP48H10 - Fast type, the directions of the bidirectional digitals are configurable for every group of 8 channels. If an output is selected as direction, the voltage output can be configured to either 3.3V or 5V. The supported maximum sampling rate for analog inputs is 5Msps. The supported maximum sampling rate for analog outputs is 10Msps. |
Inputs
This block has no input.
...
- The mezzanine option blocks can be linked to an OpCtrl block or to an OpLnk block. However, all the mezzanine option blocks related to the same FPGA must be in the same RT-LAB subsystem.
- The feature OP5369 is supported with bitstreams generated with RT-XSG version 3.3.1 and above.
- The feature OP5330 is supported with bitstreams generated with RT-XSG version 3.3.2 and above.
- The features OP5367-3 and OP5367-5 are supported with bitstreams generated with RT-XSG version 3.3.3 and above.
- The feature OP48H10 - Fast is supported with bitstreams generated with RT-XSG version 3.5.0 and above.