The following table contains the list of data that are read from the power-flow Excel.
Power-Flow Data
Entry | Description | Acceptable values |
|---|---|---|
NodeId | Node identifier | Up to 32 alphanumeric characters, but no blank spaces. |
KVLLBase | Bus Base line-to-line Voltage (kV) | Any value |
VLNA | Phase A line-to-nature Voltage Magnitude (kV) | |
VLNB | Phase B line-to-nature Voltage Magnitude (kV) | |
VLNC | Phase Cline-to-nature Voltage Magnitude (kV) | |
PH-AngleA | Phase A line-to-nature Voltage Angle (degree) | |
PH-AngleB | Phase B line-to-nature Voltage Angle (degree) | |
PH-AngleC | Phase C line-to-nature Voltage Angle (degree) | |
GenMinKVAR | Minimum Reactive power of the generator | |
GenMaxKVAR | Maximum Reactive power of the generator | |
GenKW | Active power of the generator | |
GenKVA | Reactive power of the generator | Any value between GenMinKVAR and GenMaxKVAR |
CapId | Capacitor identifier | May contain up to 31 alphanumeric characters, but no blank spaces |
SpotNumber | Spot load number | Any alpha-numerical string or numbers. |
SectionId | Section Identifier | May not contain blank spaces |