Page Content
...
Connect the power cord to the unit and to the appropriate power source (outlet).
Connect the Ethernet cable to the leftmost bottom network port
OPTIONAL: Connect one end of a PCIe cable to the PCIe Host adapter. The other end is connected to another unit, most likely an FPGA processor and I/O expansion unit.
Turn on the main power switch in the back.
| Note |
|---|
Make sure that all cables are properly connected before powering up. Make sure that the main power switch at the rear of the unit is easily accessible for emergency shutdown. |
To turn on the simulatorsimulator, press the front On/Off Button.
...