Page Content

...

Connect the Ethernet cable provided to the primary Ethernet port named eno1.
Its The default IP address: 10.64.117.149. is written on a label in the front of the unit.

...

IPMI

The OPAL-RT simulators can be controlled remotely through the IPMI interface. This article of the OPAL-RT knowledge base explains how to do so.
Your IPMI credentials are in the HIL2GO bundle data card named “Meet your HL2GO bundle.” delivered with your system.

...

• Turn on the main power switch in the back of the OP4512.

  • WARNING: Make sure that the main power switch at the rear of the unit is easily accessible for emergency shutdown.

• Press the red power button in the front of the unit.

...