The following section shows the relationship between the I/O blocks in the RT-LAB model and the signal conditioning modules installed on the OP4512 simulator.
They are divided by groups and sections, and each is clearly identified in the illustrations.
...
Nomenclature correspondence between Simulink I/O blocks and OP4512 I/Os | |
Simulink blocks I/O nomenclature | OP4512 I/O ID nomenclature |
Slot (1, 2 or 3) | Slot/Group (1, 2 or 3) |
Module (A, B or C) | Section (A, B or C) |
Subsection 1 (SS1) | (Pin ID 0 -to 7) |
Subsection 2 (SS2) | (Pin ID 8 -to 15) |
Subsection 3 (SS3) | (Pin ID 16 -to 23) |
Subsection 4 (SS4) | (Pin ID 24 -to 31) |
The RT-LAB’s Simulink blocks used to access the OP4512 simulator I/Os use the following ID nomenclature:
SlotX.ModuleY.SubSectionZ.
To map the Simulink ID to the physical I/Os in the OP4512 (rear panel), the user is advised to use the nomenclature correspondence in the table above.
For example, in Simulink, Slot1. ModuleA. Subsection3 is equivalent to Group1.A.(16-23) on the OP4512 simulator.
...