...
Additionally, the Advanced Analog Out offers the user the possibility of selecting the source of data for each channel. The sources can be either from the simulation (from the Simulink model or LabView Dashboards panels) or from other blocks internal to the bitstream (such as electric solvers).
...
In order to output data from the model, connections must be made between points in the model (in the form of OpOutput blocks) and the analog output connectable points.
To create a connection , the user has to drag-and-drop the connectable items (either vector or individual channel) onto an appropriate OpOutput block in the Configuration panel of the RT-LAB project, use the Dashboards interface, accessible from the project, and refer to its documentation.
In the case of the standard analog output, a connection can be made either on the entire vector or on each individual item of the vector (i.e. analog output channel).
Connections with LabView Dashboards panels are also possible.
...
- The CPU (i.e. sending data from the Simulink model or LabView Dashboards panels)
- Data coming from the logic that is internal to the FPGA. As in the example above, the choices could be outputs of an eHS block
...