Versions Compared

Old Version 2

changes.mady.by.user Sylvain Ménard

Saved on

compared with

New Version Current

changes.mady.by.user Sylvain Ménard

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Page Content

Table of Contents
minLevel1
maxLevel3
include
outlinefalse
indent
excludePage Content
typelist
class
printablefalse

OP4610XG Standard Configuration

...

B. In the standard OP4610XG configuration, this section contains a DB9 connector module for RS422 signals typically used to transmit differential encoder inputs and outputs; however, other options are available.

C. Standard computer connectors (from left to right):

  • 1 VGA Port

  • 1 Serial Port (COM1)

  • 2 1G LAN RJ-45 Ports

  • 1 IPMI LAN RJ-45 Port

  • 2 USB 3.2 Gen 2 Ports

  • 1 HDMI Port

  • 2 10G LAN RJ-45 Ports

  • Unit Identifier (UID) switch

D.  2 2 PCIe free slots are available for optional I/O card. See OP4610XG PCIe optional I/O cards below.

OP4610XG I/O Expansion Options 
Anchor
IOExpansion
IOExpansion

...

Note

The optional connector kit must be selected at the time of purchase and factory-installed.


RS422 Connector kit
(OP5969-1)

OP4510 V2-1 RS422 ConnectorsImage Removed
OP4510 V2-1 RS422 ConnectorsImage Added

DEFAULT connector kit installed
The DB9 connectors for RS422 signals are typically used to transmit differential encoder inputs and outputs. Refer to the OP5969-1 User Manual for specifications and pin assignment.

Fiber-Optic Connector kit
(OP5969-2)

OP4510 V2-2 Fiber Optic ConnectorsImage Removed
OP4510 V2-2 Fiber Optic ConnectorsImage Added

Optional connector kit
Fiber-optic connector kit provides 6 RX and 6 TX channels.
These channels can be used as digital I/Os or for low-speed communication protocols.
The ORION protocol, developed by OPAL-RT is compatible with these channels and available in custom bitstreams. Refer to the OP5969-2 User Manual for specifications and pin assignment.

OP4610XG PCIe Optional I/O

...

Cards
Anchor
PCIeExpansion
PCIeExpansion

The following PCIe options are available for the OP4610XG:

  • Up to 2 expansion kits listed below may be installed in an OP4610XG

    if OP5451, OP3411 or OP3821 is chosen by the client.Only 1 expansion kit may be installed in an OP4610XG  if OP3811 or OP3812 is chosen by the client

    .

Info

NOTE: PCIe optional cards must be selected at the time of purchase and factory-installed.

OP5451
Copper cable

Image RemovedOP5451


Image Added

Passive/active PCIe expansion with standard PCIe iPass x4 connector interface. This option is used to connect the OP4610XG to an OPAL-RT expansion I/O chassis. The option comes as a kit including a 2 m (6 ft) copper cable.

OptionPlatformType of cable

Platforms

  • OP4610XG to OP4520

  • OP4610XG to OP5607

  • OP4610XG to OP5705-IO

  • OP4610XG to OP5707-IO

Copper cable, 2 m (6 ft)

OP3411

OP3411Image Removed
OP3411Image Added

CANbus protocol expansion board with a CANbus standard 25-pin connector interface.

OP3811

OP3811Image Removed

Image Removed


OP3811Image AddedImage Added

GPS time synchronization (IEEE 1588) with RJ45 connector interface and expansion connector plate with external synchronization input connectors and Fiber-optic synchronization output.

OP3812

OP3812Image Removed
OP3812Image AddedImage Added

Image Removed

GPS time synchronization (IEEE 1588) with SFP connector interface and expansion connector plate with external synchronization input connector and Fiber-optic synchronization output.

OP3821

OP3821_Ethernet_BackplateImage Removed
OP3821_Ethernet_BackplateImage Added

Dual-port PCIe x1 Gigabit Ethernet interface.