Table of Contents

maxLevel	1

Include Page

INT

	PINT:General Section

INT

	PINT:General Section

Status

colour	Green
title	SPS WORKFLOW

Status

colour	Blue
title	Schematic editor WORKFLOW

Introduction

This firmware includes:

One eHS x128 Gen4 Solver
One Dual Permanent Magnet Synchronous Machines (PMSM-VDQ) model
One Quad Generic Machines (GM) model
One Analog Output Mapping and Rescaling (AOMR) module
One Analog Input Differential Rescaling (AIR) module
One Thermal Losses (TL) module
One Saturable Transformer (satXFO) module

LoadIn/DataIn/DataOut mapping

	LoadIn	DataIn	DataOut
1	Config eHS	Inputs eHS	eHS Averaged
2	Scenario / Rst eHS = Status	TSDO 1 - eHS 0 to 7	eHS DownSample
3		TSDO 2 - eHS 8 to 15	Digital In 1A - 0 to 7
4	PWM 1B - 0 to 7	TSDO 3 - eHS 16 to 23	Digital In 1A - 8 to 15
5	PWM 1B - 8 to 15	TSDO 4 - eHS 24 to 31	Digital In 1A - 16 to 23
6	PWM 1B - 16 to 23	TSDO 5 - eHS 32 to 39	Digital In 1A - 24 to 31
7	PWM 1B - 24 to 31	TSDO 6 - eHS 40 to 47	Analog In 2A - 0 to 7
8		TSDO 7 - eHS 48 to 55	Analog In 2A - 8 to 15
9		TSDO 8 - eHS 56 to 63	PMSM VDQ 1/2
10		TSDO 9 - eHS 64 to 71	Encoder Input on RS422
11		Digital Out 1B - SDO 0 to 7	Quad Generic Machine
12	Config AOMR	Digital Out 1B - SDO 8 to 15	Encoder Input on Digital In 1A
13	eHS PWM 1 - eHS 0 to 7	Digital Out 1B - SDO 16 to 23	Thermal Losses
14	eHS PWM 2 - eHS 8 to 15	Digital Out 1B - SDO 24 to 31
15	eHS PWM 3 - eHS 16 to 23
16	eHS PWM 4 - eHS 24 to 31
17	Config eHS AIR
18	Config PMSM VDQ1/2
19	Config Encoder Input on RS422	AOMR/ Analog Out 2B - 0 to 7
20	Config Quad Generic Machine	Analog Out 2B - 8 to 15
21	Config Encoder Input on Digital In 1A
22	Config Thermal Losses
23	Config Encoder Output on RS422	eHS PWM 1 - 0 to 7
24	SFP	eHS PWM 2 - 8 to 15
25		eHS PWM 3 - 16 to 23
26		eHS PWM 4 - 24 to 31
27		eHS SWG
28		PMSM VDQ 1/2
29		Quad Generic Machine
30		Thermal Losses
31		Encoder Output on RS422
32		LEDs
33		TSDO 10 - eHS 72 to 79
34		TSDO 11 - eHS 80 to 87
35		TSDO 12 - eHS 88 to 95
36		TSDO 13 - eHS 96 to 103
37		TSDO 14 - eHS 104 to 111
38		TSDO 15 - eHS 112 to 119
39		TSDO 16 - eHS 120 to 127
40		TSDO 17 - eHS 128 to 135
41		TSDO 18 - eHS 136 to 143
42		SFP

System Overview

Image Modified

Include Page

INT

	PINT:Extensive I/O compatibility - OP4XXX IOConfig1 (Polymorphism)

INT

	PINT:Extensive I/O compatibility - OP4XXX IOConfig1 (Polymorphism)

eHS solver

Status
colour Green
title SPS Workflow specific

Include Page

INT

	PINT:SPS - eHS Block

INT

	PINT:SPS - eHS Block

Connectivity

Status
colour Green
title SPS Workflow specific

Source Type	Source Index	Source Name	Details
Input	0	CPU Input
	1	eHS Analog In	Slot 2A - Ch00-15
	2	PMSM VDQ 1/2	PMSM1 Ia/PMSM1 Ib
	2	PMSM VDQ 1/2	PMSM2 Ia/PMSM2 Ib
	3	Sine Wave Generator
	4	Quad Generic Machine	IM1 Stator Ia/IM1 Stator Ib/IM1 Rotor Ia/IM1 Rotor Ib
			IM2 Stator Ia/IM2 Stator Ib/IM2 Rotor Ia/IM2 Rotor Ib
			IM3 Stator Ia/IM3 Stator Ib/IM3 Rotor Ia/IM3 Rotor Ib
			IM4 Stator Ia/IM4 Stator Ib/IM4 Rotor Ia/IM4 Rotor Ib
	5	Data stream from SFP #00
	6	Saturbale Transformer
Gate	0	CPU Gating Signal
	1	PWM
	2	Digital Input	Slot 1A - Ch00-31

Status
colour Green
title SPS Workflow specific

To contextualize the Input and Gate Configuration table with this firmware configuration, the eHS firmware config tab must be configured with the following custom input source enumeration:

Code Block
{'CPU Model',0,64;'Sine Wave Generator',3,32;'PMSM',2,4;'GM',4,16;'Saturable Transformer',6,32}

And this custom gate sources enumeration:

Code Block
{'CPU Model',0,72;'Digital Inputs',2,32;'PWM',1,32}

Include Page

INT

	PINT:PMSM VDQ firmware block section

INT

	PINT:PMSM VDQ firmware block section

Include Page

INT

	PINT:SE PMSM VDQ Image

INT

	PINT:SE PMSM VDQ Image

Include Page

INT

	PINT:SPS PMSM VDQ Image

INT

	PINT:SPS PMSM VDQ Image

Communication port configuration for the Dual PMSM (VDQ) block

	Dual PMSM Motors VDQ
Machine Label	PMSM 1	PMSM 2
Data In Port Number	28
Load In Port Number	18
Data Out Port Number	9

Connectivity (Input)

code

title

The signals received could be used as external carrier for machine resolver module.

Code Block
Analog In - Slot 2A - Ch00-15

Encoder Output

Code Blocktitle

Encoder outputs are sent to

Code Block
Digital Out - Slot 3B - RS422

Hardware Pin assignment

Include Page

INT

	PINT:Generic Machine firmware block section

INT

	PINT:Generic Machine firmware block section

Include Page

INT

	PINT:SE Generic Machine Image

INT

	PINT:SE Generic Machine Image

Include Page

INT

	PINT:SPS Generic Machine Image

INT

	PINT:SPS Generic Machine Image

Communication port configuration for the Quad Generic Machine (GM) block

	Quad Generic Machine
Machine Label	IM 1	IM 2	IM 3	IM 4
Data In Port Number	29
Load In Port Number	20
Data Out Port Number	11

Connectivity (Input)

Code Blocktitle

The signals received could be used as external carrier for machine resolver module.

Code Block
Analog In - Slot 2A - Ch00-15

Encoder Output

Code Blocktitle

Encoder outputs are sent to

Code Block
Digital Out - Slot 2B

	Encoder 1	Encoder 2
A	Ch00	Ch04
B	Ch01	Ch05
Z	Ch02	Ch06

Hardware Pin assignment

Include Page

INT

	PINT:Thermal Losses firmware block section

INT

	PINT:Thermal Losses firmware block section

Communication port configuration for the Thermal Losses (TL) block

	Thermal Losses
Data In Port Number	30
Load In Port Number	22
Data Out Port Number	13

Include Page

INT

	PINT:AOMR firmware block section

INT

	PINT:AOMR firmware block section

Communication port configuration for the Analog Output Mapping and Rescaling (AOMR) block

	AOMR - Slot 2B
Version	V2
Data In Port Number	19
Load In Port Number	12

Include Page

INT

	PINT:AIR firmware block section

INT

	PINT:AIR firmware block section

Communication port configuration for the Analog Input Differential Rescaling (AIR) block

	AIR - Slot 2A
Channels	Ch00-15
Load In Port Number	17

AOMR Output

Lane Index	Signal Source	Details
0	eHS Outputs	eHS Y01-128
1	PMSM VDQ 1/2 AnalogOut	/wiki/spaces/EFS/pages/22516273
2	Quad Generic Machine AnalogOut	/wiki/spaces/EFS/pages/22516340
3	Data Stream from SFP #01

Include Page

INT

	PINT:SFP Mapping and Communication block section

INT

	PINT:SFP Mapping and Communication block section

Communication port configuration for the SFP mapping and communication block

	SFP - Channel 0
Data In Port Number	42
Load In Port Number	24

Include Page

	INT:Analog In block
	INT:Analog In block

Include Page

	INT:Analog In block section
	INT:Analog In block section

Include Page

	INT:OPAL-Board Analog In
	INT:OPAL-Board Analog In

Communication port configuration for the Analog Input (AI) block

	Slot 2A
Channels	Ch00-07	Ch08-15
Data Out Port Number	7	8

Connector Pin Assignment

Please refer to your hardware documentation

Hardware Pin assignment

Include Page

INT

	PINT:Analog Out block

INT

	PINT:Analog Out block

Include Page

INT

	PINT:Analog Out block section

INT

	PINT:Analog Out block section

Include Page

INT

	PINT:OPAL-Board Analog Out

INT

	PINT:OPAL-Board Analog Out

Communication port configuration for the Analog Output (AO) block

	Slot 2B
Channels	Ch00-07	Ch08-15
Data In Port Number	19	20

Connector Pin Assignment

Please refer to your hardware documentation

Hardware Pin assignment

Include Page

INT

	PINT:Digital In block

INT

	PINT:Digital In block

Include Page

INT

	PINT:Digital In block section

INT

	PINT:Digital In block section

Include Page

INT

	PINT:OPAL-Board Digital In

INT

	PINT:OPAL-Board Digital In

Communication port configuration for the Digital Input (DI) block

	Slot 1A
Channels	Ch00-07	Ch08-15	Ch16-23	Ch24-31
Data Out Port Number	3	4	5	6

Connector Pin Assignment

Please refer to your hardware documentation

Hardware Pin assignment

Include Page

INT

	PINT:Digital Out block

INT

	PINT:Digital Out block

Include Page

INT

	PINT:Digital Out block section

INT

	PINT:Digital Out block section

Include Page

INT

	PINT:OPAL-Board Digital Out

INT

	PINT:OPAL-Board Digital Out

Communication port configuration for the Digital Output (DO) block

	Slot 1B
Channels	Ch00-07	Ch08-15	Ch16-23	Ch24-31
Data In Port Number	11	12	13	14
Load In Port Number	4	5	6	7

Connector Pin Assignment

Please refer to your hardware documentation

Hardware Pin assignment

Include Page

INT

	PINT:Encoder Input block

INT

	PINT:Encoder Input block

Include Page

INT

	PINT:Encoder Input block section

INT

	PINT:Encoder Input block section

Include Page

INT

	PINT:OPAL-Board Encoder In

INT

	PINT:OPAL-Board Encoder In

Communication port configuration for the Encoder Intput (ENC IN) block

	Slot 3A - RS422
Nb of Encoder Signals	2
Load In Port Number	19
Data Out Port Number	11

Connector Pin Assignment

Please refer to your hardware documentation

Hardware Pin assignment

Include Page

INT

	PINT:Encoder Output block

INT

	PINT:Encoder Output block

Include Page

INT

	PINT:Encoder Output block section

INT

	PINT:Encoder Output block section

Include Page

INT

	PINT:OPAL-Board Encoder Out

INT

	PINT:OPAL-Board Encoder Out

Communication port configuration for the Encoder Output (ENC OUT) block

	Slot 3B - RS422
Nb of Encoder Signals	2
Data In Port Number	31
Load In Port Number	23

Connector Pin Assignment

Please refer to your hardware documentation

Hardware Pin assignment

Versions Compared

Old Version 2

New Version Current

Key

Introduction

System Overview

eHS solver

Status
colour Green
title SPS Workflow specific

Connectivity

Status
colour Green
title SPS Workflow specific

Status
colour Green
title SPS Workflow specific

Communication port configuration for the Dual PMSM (VDQ) block

Connectivity (Input)

title

The signals received could be used as external carrier for machine resolver module.

Encoder Output

Encoder outputs are sent to

Communication port configuration for the Quad Generic Machine (GM) block

Connectivity (Input)

The signals received could be used as external carrier for machine resolver module.

Encoder Output

Encoder outputs are sent to

Communication port configuration for the Thermal Losses (TL) block

Communication port configuration for the Analog Output Mapping and Rescaling (AOMR) block

Communication port configuration for the Analog Input Differential Rescaling (AIR) block

AOMR Output

Communication port configuration for the SFP mapping and communication block

Communication port configuration for the Analog Input (AI) block

Connector Pin Assignment

Communication port configuration for the Analog Output (AO) block

Connector Pin Assignment

Communication port configuration for the Digital Input (DI) block

Connector Pin Assignment

Communication port configuration for the Digital Output (DO) block

Connector Pin Assignment

Communication port configuration for the Encoder Intput (ENC IN) block

Connector Pin Assignment

Communication port configuration for the Encoder Output (ENC OUT) block

Connector Pin Assignment

Page Comparison

Versions Compared

Old Version 2

New Version Current

Key

Introduction

System Overview

eHS solver

StatuscolourGreentitleSPS Workflow specific

Connectivity

StatuscolourGreentitleSPS Workflow specific

StatuscolourGreentitleSPS Workflow specific

Communication port configuration for the Dual PMSM (VDQ) block

Connectivity (Input)

title

The signals received could be used as external carrier for machine resolver module.

Encoder Output

Encoder outputs are sent to

Communication port configuration for the Quad Generic Machine (GM) block

Connectivity (Input)

The signals received could be used as external carrier for machine resolver module.

Encoder Output

Encoder outputs are sent to

Communication port configuration for the Thermal Losses (TL) block

Communication port configuration for the Analog Output Mapping and Rescaling (AOMR) block

Communication port configuration for the Analog Input Differential Rescaling (AIR) block

AOMR Output

Communication port configuration for the SFP mapping and communication block

Communication port configuration for the Analog Input (AI) block

Connector Pin Assignment

Communication port configuration for the Analog Output (AO) block

Connector Pin Assignment

Communication port configuration for the Digital Input (DI) block

Connector Pin Assignment

Communication port configuration for the Digital Output (DO) block

Connector Pin Assignment

Communication port configuration for the Encoder Intput (ENC IN) block

Connector Pin Assignment

Communication port configuration for the Encoder Output (ENC OUT) block

Connector Pin Assignment

Status
colour Green
title SPS Workflow specific

Status
colour Green
title SPS Workflow specific

Status
colour Green
title SPS Workflow specific