The following tables provide the general pin assignments for the OP5367 DB37 connectors.
| Info |
|---|
Detailed pin assignments for all connectors can be found in the System Description document provided with your order, or refer to the general pin assignment of your specific unit. |
| Note |
|---|
Before designing cables, OPAL-RT recommends using the guideline Simulator EMC cable recommendations. |
Group A and B - Connector P1 | ConnectorP2 connector | DB37F | DB37 | DB37 | DB37 | Pin- Channel 00 to 15 |  | Group A and B - Connector P2 - Channel 16 to 31 | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
DB37F Pin | Assignment | DB37F Pin | Assignment | DB37F Pin | Assignment | DB37F Pin | Assignment | |||||||||||||
1 | +D00 | 20 | GND_ISO** | 1 | +D16 | 20 | GND_ISO | |||||||||||||
2 | +D01 | 21 | GND_ISO | 2 | +D17 | 21 | GND_ISO | |||||||||||||
3 | +D02 | 22 | GND_ISO | 3 | +D18 | 22 | GND_ISO | |||||||||||||
4 | +D03 | 23 | GND_ISO | 4 | +D19 | 23 | GND_ISO | |||||||||||||
5 | +D04 | 24 | GND_ISO | 5 | +D20 | 24 | GND_ISO | |||||||||||||
6 | +D05 | 25 | GND_ISO | 6 | +D21 | 25 | GND_ISO | |||||||||||||
7 | +D06 | 26 | GND_ISO | 7 | +D22 | 26 | GND_ISO | |||||||||||||
8 | +D07 | 27 | GND_ISO | 8 | +D23 | 27 | GND_ISO | |||||||||||||
9 | +D08 | 28 | GND_ISO | 9 | +D24 | 28 | GND_ISO | |||||||||||||
10 | +D09 | 29 | GND_ISO | 10 | +D25 | 29 | GND_ISO | |||||||||||||
11 | +D10 | 30 | GND_ISO | 11 | +D26 | 30 | GND_ISO | |||||||||||||
12 | +D11 | 31 | GND_ISO | 12 | +D27 | 31 | GND_ISO | |||||||||||||
13 | +D12 | 32 | GND_ISO | 13 | +D28 | 32 | GND_ISO | |||||||||||||
14 | +D13 | 33 | GND_ISO | 14 | +D29 | 33 | GND_ISO | |||||||||||||
15 | +D14 | 34 | GND_ISO | 15 | +D30 | 34 | GND_ISO | |||||||||||||
16 | +D15 | 35 | GND_ISO | 16 | +D31 | 35 | GND_ISO | |||||||||||||
17 | +12VRefer to unit’s pin assignment* | 36 | Refer to unit’s pin assignment* | 17 | Refer to unit’s pin assignment* | 36 | Refer to unit’s pin assignment* | |||||||||||||
18 | N.C.Reserved | 37 | GND_ISO | 18 | N.C.Reserved | 37 | GND_ISO | |||||||||||||
19 | Refer to unit’s pin assignment* | 19 | ||||||||||||||||||
Note: ALL -Dn pins are tied to ground on the OP5369 board as indicated in columns 4 and 8 of the table. | ||||||||||||||||||||
* From the Carrier Board, non-isolated, limited to 400mA
...
Refer to unit’s pin assignment* |
* Unit can be a Real-time Simulator or an FPGA Processor and IO Expansion Unit from the OP4000 or the OP5000 series.
** GND_ISO: Isolated ground