Page Content
| Table of Contents | ||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
...
| Attachments | ||||
|---|---|---|---|---|
|
| Info |
|---|
You only have to import the bitstream configuration file once. |
To import the new bitstream configuration file in the Schematic Editor, open Schematic Editor from Windows and follow this procedure: Including a new firmware
...
Verify if the firmware has been properly imported as explained in the same page.
You are looking for this firmware configuration name : Firmware for kintex7 TE0741_4-EX-0001-3_4_1_816-eHSx128m_Gen4_DBDBD8C322QEIO
You can confirm that this firmware entry is the one corresponding to the HIL2GO-200 system you just imported by moving youyour mouse pointer to the firmware name appearing in the top right corner when the firmware name is selected in the list.
The file name of the bitstream (*.bin) appearing in the tooltip window is the same as the configuration file you imported (*.ioconf), i.e. TE0741_4-EX-0001-3_4_1_816-eHSx128m_Gen4_DBDBD8C322QEIO-4F-34
...
Configuring a Setup for a New Simulation Project
...
These are the values you must select:
Simulator: OP4610
eHS license class: It depends on the option you purchased with your bundle. The default is x16
Firmware: Firmware for kintex7 TE0741_4-EX-0001-3_4_1_816-eHSx128m_Gen4_DBDBD8C322QEIO, release 1.8.0 (latest)
...
| Panel | ||
|---|---|---|
| ||
NEXT STEP >Test your System it’s up to you. You may want to: |