Versions Compared

Old Version 3

changes.mady.by.user Sylvain Ménard

Saved on

compared with

New Version Current

changes.mady.by.user Sylvain Ménard

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

P3

 CH00-15 (VIN_ISO1)
  • Place jumper over pins 1 2 and 2 3 to obtain +5V
  • Place jumper over pins 1 and 2 and 3 to obtain 3V3

P4

CH16-31 (VIN_ISO2)
  • Place jumper over pins 1 and 2 to obtain +3V3
  • Place jumper over pins 2 and 3 to obtain 5V

...

Background Color
color#D3D3D3


TTL signals are not recommended for long-distance data transmission. We recommend using this board with cable lengths no longer than 1.5 meters (5 ft). When using longer lengths, OPAL-RT recommends terminating the lines to avoid over/undershoots or using alternative transmissions, such as differential mode (e.g: LVDS OP5355-3, RS422 OP5356-5 [5V] or OP5355-3 [3V3]).

For details on how to terminate the lines and to interconnect equipment with the OP5352 board, please refer to the WP CMOS/TTL opal RT_rev 1.0.



Background Color
color#D3D3D3


For compatibility of this card, please consult the Software compatibility and Hardware compatibility tables.


...