The OpCtrl block in RT-LAB must be configured with the appropriate synchronization mode (MASTER, SLAVE). Select Master or Slave in the “Synchronization mode” field.
The remaining parametersd in this window are determined according to the chassis and the type of FPGA.
OpCtrl block synchronization parameters
Specifications
Product name | OP5963 Fiber Optic Synch Module |
|---|---|
Part number | 126-0537 |
Product type | OP5600 external synchronization |
Power | Supplied by chassis |
RT-RX Receiver | Avago HFBR-RNS010Z |
RT-TX Transmitter | Avago HFBR-RNS010Z |
Connector type | VersaLink termination |
Tx/Rx max frequency | 50 MBaud at 50 meters maximum. |
Type of Optical Fiber | Plastic Optical Fiber (POF), Multi-Mode Fiber (MMF), 1mm diameter core, 2.2mm diameter Jacket |
Wavelength: | 650 nm. |
Dimensions | 8.75 x 7.64 cm (3.44 in x 3.0 in) |
Operating temperature | 10 to 40 ºC (50 to 104ºF) |
Storage temperature | -55 to 85ºC (-67 to 185ºF) |
Relative humidity | 10 to 90%, non condensing |
Maximum altitude | 2,000 m (6562 ft.) |