OP4610XG Standard Configuration

A. DB37 connectors for digital or analog inputs and outputs.

B. In the standard OP4610XG configuration, this section contains a DB9 connector module for RS422 signals typically used to transmit differential encoder inputs and outputs; however, other options are available.

• See OP4610XG I/O Expansion Options below for detailed information on available configuration options.

C. Standard computer connectors (from left to right):

• 1 VGA Port
• 1 Serial Port (COM1)
• 2 1G LAN RJ-45 Ports
• 1 IPMI LAN RJ-45 Port
• 2 USB 3.2 Gen 2 Ports
• 1 HDMI Port
• 2 10G LAN RJ-45 Ports
• Unit Identifier (UID) switch

D.  2 PCIe free slots are available for optional I/O card. See OP4610XG PCIe optional I/O cards below.

OP4610XG I/O Expansion Options 

The OP4610XG comes with an RS-422 Connector Kit (OP5969-1) factory installed by default.

The optional Fiber-Optic Connector Kit (OP5969-2) can also be installed. It will replace the default connector kit, since only ONE of these connector kits can be installed in an OP4610XG at a time.

OP4610XG PCIe Optional I/O cards

The following PCIe options are available for the OP4610XG:

• Up to 2 expansion kits may be installed in an OP4610XG if OP5451, OP3411 or OP3821 is chosen by the client.
• Only 1 expansion kit may be installed in an OP4610XG  if OP3811 or OP3812 is chosen by the client.